TY - THES U1 - Master Thesis A1 - Sarangi, Jitikantha T1 - Digital Calibration, Closed Loop Regulation and Implementation of Digital Debugging Features for the Delay Asymmetry Compensation Logic of a 3D Polarization Camera Based on Time-of-Flight Principle N2 - The work presented in this thesis deals with the distance measurement aspect of a 3D Polarization ToF camera for automotive applications that uses a Time-to-Digital Converter (TDC) to measure the time interval between the emission of light from a source and its reception. Based on the measurement of the time interval, distance can be calculated by applying the equation of motion. In application, achieving an exact distance measurement is quite strenuous because the operating conditions of the design are susceptible to change due to environmental factors. Therefore, to achieve accuracy in distance measurement, the time interval between the emission and reception of light must be measured precisely. For this purpose, a delay asymmetry compensation logic is developed. This thesis elaborates the addition of debugging features, redesign of some components, digital calibration approach and the entire testbench environment of the delay asymmetry compensation logic. It also sheds light on the implementation of the designed logic for its successful realisation in real hardware. Lastly, it concludes by narrating future prospects and further scopes of development. Y2 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37323 U6 - https://doi.org/10.26205/opus-3732 DO - https://doi.org/10.26205/opus-3732 SP - 107 S1 - 107 PB - Fachhochschule Dortmund CY - Dortmund ER - TY - RPRT U1 - Arbeitspapier A1 - Vormann, Claus T1 - Say what you pay? Pay Information Disclosure in German Job Postings N2 - Purpose – Pay transparency is a promising topic both for research and practice. In particular, the new European directive on compensation transparency will increase its importance. However, research is still relatively sparse compared to other areas of HRM. In particular, state-of-the-art and use of pay information disclosure in job postings is neglected. This paper aims to shed light on this HRM topic. Methodology – The paper summarizes the findings of a preliminary study conducted among German companies researching the proportion of firms offering compensation information in job postings and digging into the reasons behind it. Findings – Only 17 % of the participating companies disclose meaningful information about compensation in their job postings. Doing so mainly depends on the company’s attitude towards pay transparency. The age of the company has a minor negative influence, i.e.~older companies are less prone to disclose salary information. Industry, size, and existing overall pay transparency in the company do not determine if pay information is disclosed in job postings. Research limitations – The main limitation of this survey is its small size of 88 participants and the snowball sampling approach employed. This limits its representativeness and calls for follow-up studies involving more companies and a wider variation of positions included. Practical implications – While the EU directive will make it obligatory to communicate about pay before the first interview, some companies do it already. The study helps HR departments that think about changing their practice before it becomes compulsory to better judge the current standards. KW - Human Resource Management KW - Vergütung KW - Personalmarketing KW - Studie KW - Pay Transparency KW - Job Posting KW - Gehaltstransparenz Y1 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37407 U6 - https://doi.org/10.26205/opus-3740 DO - https://doi.org/10.26205/opus-3740 SP - 13 S1 - 13 ER - TY - THES U1 - Bachelor Thesis A1 - Henkemeier, Hendrik T1 - Das semantische Potential chorischer Atmosphären (Loop-Groups) im Film N2 - Volltext-Dokument wurde aufgrund notwendiger Korrekturen auf Wunsch des Urhebers entfernt. Die korrigierte Version ist unter folgendem Link erreichbar: https://opus.bsz-bw.de/fhdo/frontdoor/index/index/searchtype/latest/docId/3721/start/0/rows/10 Die vorliegende Arbeit behandelt den semantischen Mehrwert von chorischen Atmo- sphären. Dabei lege ich meinen Fokus auf den gestalterischen Nutzen von Loop Groups im Filmton. Auffällig und interessant ist, dass es bisher wenig inhaltliche Aus- einandersetzung oder Forschung zu dem Thema gibt. Nach vorherigen Definitionen untersuche ich die Entwicklung chorischer Atmosphären vom antiken griechischen Theater bis zum modernen Film. Untersuchungs- schwerpunkt sind drei Filmanalysen von drei sehr unterschiedlichen Filmen der 1990er- bis 2010er-Jahre („Mighty Aphrodite“, „Se7en“, „Sicario“ und „Das Parfum“). Die Analysen zeigen, dass die gestalterischen Mittel und die gestalterischen Möglich- keiten zahlreich und in ihren Zielen und Wirkungen auf das Publikum vielfältig sind. Folgende Schlussfolgerungen gehen aus der Untersuchung hervor: Loop Groups können unter anderem kommentierend, aufmerksamkeitslenkend oder stimmungs- verstärkend sein, die Größe oder Lage des Handlungsorts verdeutlichen oder sogar inhaltlich zur Geschichte beitragen. Auch können sie für surreale Szenen verwendet werden. Aus dieser Vielfalt von Einsatzmöglichkeiten chorischer Elemente leitet sich im zweiten Teil der Untersuchung ab, dass die Verwendung im Produktionsprozess eines Films frühzeitig und umfassend geplant und vorbereitet sein muss, um optimale Ergebnisse zu erzielen. Das betrifft das Casting geeigneter Sprecherinnen und Sprecher, die Wahl der idealen Aufnahmetechnik und die (Ton)-Regieführung. Der Exkurs der Arbeit zeigt weitere technische Möglichkeiten der Herstellung von Loop Groups auf, wie zum Beispiel „Sound Particles“ und beschreibt und bewertet Entwicklungen, die im Verlauf der Corona-Pandemie entstanden sind. Aufgrund dieser Ergebnisse lässt sich nun gezielter mit Loop Groups arbeiten, was anhand der Bachelorarbeit „Between Two Lines“ verdeutlicht wurde. KW - Loop-Group KW - Sounddesign Y2 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-36700 U6 - https://doi.org/10.26205/opus-3670 DO - https://doi.org/10.26205/opus-3670 N1 - Volltext-Dokument wurde aufgrund notwendiger Korrekturen auf Wunsch des Urhebers entfernt. Die korrigierte Version ist unter folgendem Link erreichbar: https://opus.bsz-bw.de/fhdo/frontdoor/index/index/searchtype/latest/docId/3721/start/0/rows/10 SP - 84 S1 - 84 ER - TY - THES U1 - Master Thesis A1 - García Rodríguez, Saul T1 - Design and FPGA implementation of a highly resource-efficient AES-256 encryption and decryption engine N2 - Growing demand for security in a wide range of fields gives raise to research for more efficient and modern methods. Additionally, the increase of systems that are deployed on hardware requires security to be embedded in small area to protect intellectual property, hardware, and integrity and confidentially of sensible data. Therefore, in this work a design and FPGA implementation of a highly resource-efficient AES-256 encryption and decryption engine is presented, as well as its comparison with state-of-the-art designs. The design shows a reduction in the resources used due to its architecture to reuse hardware throughout all the processing. The design is implemented on a Xilinx Artix-7 FPGA. KW - AES KW - encryption KW - security KW - FPGA KW - decryption Y2 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37471 U6 - https://doi.org/10.26205/opus-3747 DO - https://doi.org/10.26205/opus-3747 SP - 263 S1 - 263 ER - TY - BOOK U1 - Buch A1 - Beenken, Matthias A1 - Linnenbrink, Lukas T1 - Betriebswirtschaftliche Strukturen des Versicherungsvertriebs - BVK-Strukturanalyse 2022/2023 N2 - Befragung der Versicherungsvermittler zu betriebswirtschaftlichen Kenngrößen und unternehmerischen Strukturen Mit einem Vorwort von Andreas Vollmer, Vizepräsident des Bundesverbands Deutscher Versicherungskaufleute e.V. Y1 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37671 SN - 978-3-938226-68-1 SB - 978-3-938226-68-1 U6 - https://doi.org/10.26205/opus-3767 DO - https://doi.org/10.26205/opus-3767 SP - 167 S1 - 167 PB - VersicherungsJournal Verlag CY - Ahrensburg ER - TY - THES U1 - Bachelor Thesis A1 - Samdouni, Fouzya T1 - Realisierung einer UART zur CAN Kommunikationsbrücke mit Hilfe eines STM32 ARM Microcontrollers N2 - Diese Bachelorarbeit beschäftigte sich mit der Realisierung einer UART-zu-CAN-Kommunikationsbrücke mithilfe eines STM32L476RG ARM Mikrocontrollers. Ziel des Projekts war es, die Kommunikation zwischen zwei PCs und zwei Mikrocontrollern über UART und CAN zu ermöglichen. Die Arbeit umfasste die physische Verbindung der Komponenten, die Programmierung der Mikrocontroller mit Hilfe von STMCubeIDE und CubeMX sowie die Erstellung einer Benutzeroberfläche mit Qt Creator. Die CAN-Protokolleinheit im STM32L476RG Mikrocontroller spielte eine zentrale Rolle in diesem Projekt. Sie ermöglichte die CAN-Kommunikation nach erfolgreicher Konfiguration. Durch die Überwachung der Signale über ein Oszilloskop konnte die ordnungsgemäße Datenübertragung festgestellt werden. Die Arbeit präsentiert die Konfiguration der UART- und CAN-Schnittstellen sowie die Implementierung von Kommunikationsprotokollen, um Nachrichten zwischen den PCs und Mikrocontrollern auszutauschen. Die Ergebnisse zeigen, dass die Kommunikationsbrücke erfolgreich realisiert wurde und die Datenübertragung zuverlässig funktioniert. Diese Arbeit liefert somit einen wertvollen Beitrag zur Entwicklung von Kommunikationslösungen in eingebetteten Systemen und zeigt, wie Mikrocontroller effektiv für die Realisierung von Kommunikationsbrücken eingesetzt werden können. Dieses Projekt eröffnet Möglichkeiten für zukünftige Anwendungen, bei denen die Vernetzung von Mikrocontrollern und PCs erforderlich ist. N2 - This bachelor's thesis focused on the implementation of a UART-to-CAN communication bridge using an STM32L476RG ARM microcontroller. The project aimed to enable communication between two PCs and two microcontrollers via UART and CAN. The work included the physical connection of the components, programming the microcontrollers using STMCubeIDE and CubeMX, and creating a user interface with Qt Creator. The CAN protocol unit in the STM32L476RG microcontroller played a central role in the communication after successful configuration. By monitoring signals on the oscilloscope proper data transmission has been ensured. The thesis presents the configuration of the UART and CAN interfaces and the implementation of communication protocols to exchange messages between the PCs and microcontrollers. The results demonstrate the successful realization of the communication bridge, with reliable data transmission. This work, therefore, makes a valuable contribution to the development of communication solutions in embedded systems, demonstrating how microcontrollers can effectively realize communication bridges. This project opens avenues for future applications where networking microcontrollers and PCs is necessary. KW - Qt Creator KW - communication bridge KW - can KW - uart KW - stm32 KW - kommunikationsbrücke Y2 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37664 U6 - https://doi.org/10.26205/opus-3766 DO - https://doi.org/10.26205/opus-3766 SP - 79 S1 - 79 ER - TY - THES U1 - Bachelor Thesis A1 - Matekeu Fokwa, Oriane T1 - Auslesung und Steuerung eines Oszilloskops mit SCPI-Befehlen über Ethernet unter Verwendung der LXI-Bibliothek N2 - Die Fernsteuerung und Datenerfassung von Oszilloskopen über Ethernet ist ein relevantes Thema für die Optimierung von Messaufbauten. Das Ziel dieses Projekts besteht darin, eine benutzerfreundliche Anwendung zu entwickeln, die es ermöglicht, ein Oszilloskop über Ethernet anzusteuern und Messdaten abzurufen. Um dieses Ziel zu erreichen, sind mehrere Schritte erforderlich. Zunächst wird eine virtuelle Maschine mit der Linux-Distribution Ubuntu eingerichtet. Anschließend wird die Entwicklungsumgebung Qt Creator installiert. Weiterhin wird die Bibliothek LXI (LAN eXtensions for Instrumentation) [4] installiert. Schließlich werden die Programmiersprache C und die SPCI (Standard Commands for Programmable Instruments [10]) -Befehlsdefinitionen in Qt Creator verwendet, um die gewünschte Aufgabe auszuführen. Der entwickelte Code wird getestet, indem das Oszilloskop über Ethernet mit der virtuellen Maschine verbunden wird. Am Ende dieses Projekts wird es möglich sein, verschiedene Daten eines Referenzsignals automatisch und aus der Ferne zu messen. Dies ermöglicht die flexible Fernsteuerung und Datenabfrage von Oszilloskopen über ein Netzwerk, wodurch eine effiziente Erfassung und Analyse von Messdaten ermöglicht wird. Y2 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37454 U6 - https://doi.org/10.26205/opus-3745 DO - https://doi.org/10.26205/opus-3745 SP - 64 S1 - 64 ER - TY - BOOK U1 - Buch A1 - Gustrau, Frank T1 - Electromagnetic Design BT - Theorie und Simulation elektromagnetischer Felder Y1 - 2023 SN - 978-3-446-47418-5 SB - 978-3-446-47418-5 SP - 330 S1 - 330 PB - Hanser CY - München ER - TY - THES U1 - Bachelor Thesis A1 - Tas, Yunus T1 - Härtung eines KI Hardware Beschleunigers gegen strahleninduzierte Bitfehler N2 - In dieser Arbeit wird die Strahlenhärtung eines KI Hardware Beschleunigers beschreiben, in dem das Design mit dem Triple Modular Redundancy Generator Toolset (TMRG) vollständig tripliziert wird. Anschließend wird das triplizierte Design mit einer statischen und einer dynamischen Verifikation auf die korrekte Art der Triplizierung und seiner Funktionsweise untersucht. Zuletzt werden Simulationen mit drei verschiedenen Injektionstypen durchgeführt, in dem die tatsächliche Funktion der Voter durch Injektion von Single Event Upsets geprüft wird. N2 - In this work, the radiation hardening of an AI hardware accelerator is described in which the design is fully triplicated using the Triple Modular Redundancy Generator Toolset (TMRG). Then, the triplicated design is examined with a static and a dynamic approach to verify the correct way of triplicating and its operation. Finally, simulations with three different injection types are performed, in which the actual function of the voter is tested by injecting single event upsets. Y2 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37271 U6 - https://doi.org/10.26205/opus-3727 DO - https://doi.org/10.26205/opus-3727 SP - 71 S1 - 71 ER - TY - THES U1 - Dissertation / Habilitation A1 - Koitka, Sven Steffen T1 - Vollautomatische Knochenalterbestimmung auf pädiatrischen Röntgenbildern nach Vorbild der radiologischen Vorgehensweise Y2 - 2023 N1 - Kooperative Promotion im Zusammenhang mit dem Promotionskolleg der Fachhochschule Dortmund. Kumulative Inauguraldissertation zur Erlangung des Doktorgrades der Medizinwissenschaften durch die Medizinische Fakultät der Universität Duisburg-Essen SP - 59 S1 - 59 ER -