TY - THES U1 - Master Thesis A1 - Alaee, Ladan T1 - Design and Implementation of a Mixed-Signal Processing Chain for the Optical Determination of Rotation Angles N2 - The aim of this master thesis is the design and implementation of mixed-signal processing chain for the optical determination of rotation angles by means of four sensors implemented as photodiodes with integrated polarization filters and a high-precision CORDIC hardware design implemented on an FPGA in Verilog. Furthermore, a light source and a polarizer are integrated in the measurement setup which is configured using an QT application. Y2 - 2024 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37932 U6 - https://doi.org/10.26205/opus-3793 DO - https://doi.org/10.26205/opus-3793 SP - 264 S1 - 264 ER - TY - BOOK U1 - Buch A1 - Bubolz-Lutz, Elisabeth A1 - Stiel, Janina T1 - Technikbegleitung - Aufbau von Initiativen zur Stärkung der Teilhabe Älterer im Quartier N2 - Handbuch 5 der Handbuchreihe "Ältere als (Ko-)Produzenten von Quartiersnetzwerken – Impulse aus dem Projekt QuartiersNETZ" Y1 - 2018 U6 - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-19528 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-19528 SN - 978-3-9820154-4-6 SB - 978-3-9820154-4-6 N1 - Herausgeber: Forschungsinstitut Geragogik, Fachhochschule Dortmund SP - 206 S1 - 206 ER - TY - THES U1 - Master Thesis A1 - García Rodríguez, Saul T1 - Design and FPGA implementation of a highly resource-efficient AES-256 encryption and decryption engine N2 - Growing demand for security in a wide range of fields gives raise to research for more efficient and modern methods. Additionally, the increase of systems that are deployed on hardware requires security to be embedded in small area to protect intellectual property, hardware, and integrity and confidentially of sensible data. Therefore, in this work a design and FPGA implementation of a highly resource-efficient AES-256 encryption and decryption engine is presented, as well as its comparison with state-of-the-art designs. The design shows a reduction in the resources used due to its architecture to reuse hardware throughout all the processing. The design is implemented on a Xilinx Artix-7 FPGA. KW - AES KW - encryption KW - security KW - FPGA KW - decryption Y2 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37471 U6 - https://doi.org/10.26205/opus-3747 DO - https://doi.org/10.26205/opus-3747 SP - 263 S1 - 263 ER - TY - BOOK U1 - Buch A1 - Grates, Miriam A1 - Krön, Annette A1 - Rüßler, Harald T1 - Stadtquartiere - Rahmenbedingungen verstehen und Ausgangssituation erfassen N2 - Handbuch 1 der Handbuchreihe "Ältere als (Ko-)Produzenten von Quartiersnetzwerken - Impulse aus dem Projekt QuartiersNETZ" Y1 - 2018 U6 - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-19483 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-19483 SN - 978-3-9820154-0-8 SB - 978-3-9820154-0-8 N1 - Herausgeber: Forschungsinstitut Geragogik, Fachhochschule Dortmund SP - 162 S1 - 162 ER - TY - THES U1 - Master Thesis A1 - Grimm, David A1 - Wojtok, Andreas J. T1 - Konzeptionierung und Realisierung eines Multiagentensystems am Beispiel des Projektes InMachine N2 - Unternehmen stehen auf Grund von Globalisierung, Konkurrenzdruck und immer schneller agierenden Märkten vor der Herausforderung auf diese Veränderungen flexibel reagieren zu müssen. Unternehmen die sich schnell auf Marktveränderungen einstellen können haben einen Wettbewerbsvorteil der beibehalten werden muss. Beim verarbeitenden Gewerbe resultiert das in einer Optimierung der Produktionsplanung- und Steuerung. Um eine Optimierung der Produktionsplanung- und Steuerung vornehmen zu können muss zunächst Einblick in diese zur Verfügung stehen. Kleinen und mittelständischen Unternehmen (KMUs) sind in der Regel nicht in der Lage die Kosten und Komplexität von Softwarelösungen von Herstellern wie Siemens, Dassault, oder SAP zu handhaben. Aufgrund dessen ist es notwendig Softwarelösungen anzubieten die genau auf das Einsatzszenario in KMUs zugeschnitten sind. Ziel dieser Arbeit ist das Erstellen einer Softwarelösung, um eine Optimierung der Produktionsplanung- und Steuerung zu ermöglichen, durch Einblick und Rückmeldung der Produktionsprozesse. Um dieses Ziel zu erreichen wurden zunächst Anforderungen an das Gesamtsystem gestellt. Diese Anforderungen fließen in das zu erstellende Softwarekonzept ein. Beim Softwarekonzept wurde besonders auf die lose Koppelung der Komponenten und der flexiblen Kommunikation geachtet, dadurch ist es möglich das Softwarekonzept zukunftssicher aufzustellen und das nachträgliche Erweitern der Software zu ermöglichen. Durch die Anforderung an Unternehmen flexibel auf Marktveränderungen reagieren zu können resultiert auch die Anforderung an die eingesetzte Software flexibel auf neue Gegebenheiten angepasst werden zu können. Wird diese Anpassbarkeit bereits beim Softwarekonzept berücksichtigt können Änderungen einfacher, robuster, und zu geringeren Kosten realisiert werden. Nach der Erstellung des Softwarekonzeptes wurde dieses prototypisch Implementiert. Dieses Vorgehen sichert die Qualität und Konsistenz des Softwarekonzeptes ab. Abschließend wird eine Zusammenfassung gegeben, ein Fazit gezogen und ein Ausblick gewährt. N2 - Companies are facing the challenge to adapt their behavior and react on changes initiated through globalization, competitive pressure, and fast changing markets. Companies that are capable of changing their behavior have a competitive advantage and this advantage has to be maintained. In the manufacturing industry this results in optimizing the production planning and scheduling. To enable the possibility to optimize the production planning and scheduling you have to gain insight in the production-process. Small to medium sized companies are not capable of handling the costs and complexity of software-solutions from Siemens, Dassault, or SAP. Because of that, it is necessary to create a tailor-made software-solution that fits exactly the needs of small to medium sized companies. Our goal is to create a software-solution that is capable to support the production planning and scheduling by gaining real-time insight and feedback from the production-processes. To obtain this goal requirements for the software-solution were defined. While creating the software-concept loose coupling and flexible communication were encouraged to create a system that is future proof and easy to extend. Because companies have to be flexible, so has to be the software they are using. If this flexibility is considered while developing the software-concept, it is possible to easily extend the software to low costs. After creating the software-concept it will be implemented as a prototype. This ensures the quality and consistency of the software-concept. Finally a summary, a conclusion, and an outlook will be given. KW - multi-agent system KW - production planning KW - small and medium-sized enterprises KW - sme KW - inMachine KW - Machine-to-Machine-Kommunikation KW - Internet der Dinge KW - Klein- und Mittelbetrieb Y2 - 2017 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-21408 U6 - https://doi.org/10.26205/opus-2140 DO - https://doi.org/10.26205/opus-2140 SP - 110 S1 - 110 ER - TY - THES U1 - Bachelor Thesis A1 - Krzysztofiak, Jan-Niklas T1 - E-Government, Open Government und ihr Einfluss auf Smart-City-Initiativen: Eine Sachstandsanalyse N2 - Durch den zunehmenden Einsatz von Informations- und Kommunikationstechnik (IKT) im privaten Sektor steigen die Erwartungen der Menschen an den öffentlichen Sektor. E-Government, Open Government und Smart-City-Initiativen sind die drei Konzepte, die den Einsatz von IKT im öffentlichen Sektor direkt oder indirekt thematisieren. Alle drei Konzepte haben gemein, dass sie ein enormes wirtschaftliches Potenzial haben. Diese Arbeit untersucht anhand einer Analyse umfangreicher, einschlägiger Literatur und der Durchführung leitfadengestützter Experteninterviews, ob und inwiefern sich diese drei Konzepte beeinflussen, um den öffentlichen Sektor vergleichbar zum privaten zunehmend digitaler zu gestalten. Ergebnis ist ein theoretisches Modell, dass die drei Konzepte zusammenführt und deren Wechselwirkungen und Synergien beschreibt: E-Government kultiviert technisch und organisatorisch die drei Säulen des Open Governments: Transparenz, Partizipation und Kollaboration. Im Gegenzug produziert Open Government Akzeptanz und Vertrauen in Richtung E-Government, die maßgeblich für die Adoption entsprechender E-Government-Dienste durch die Stakeholder sind. Die theoretische Zusammenführung von E-/Open Government und Smart-City-Initiativen gelingt durch die Betrachtung der Struktur, der Ziele und Chancen sowie der Voraussetzungen und Herausforderungen der drei Konzepte. Das E-/Open-Government-Konstrukt konstituiert die Smart Governance, die das Fundament jeder Smart-City-Initiative darstellt. Die gemeinsamen Ziele, die E-/Open-Government- und Smart-City-Projekte verfolgen, werden unter dem Terminus Public Value zusammengefasst. Als direkter Gegenspieler des Public Values wird Digital Divide verstanden und stellt mit dem fehlenden Vertrauen der Stakeholder in die Governance und Technologie die größte Herausforderung dar. Bedeutende Konzepte wie z.B. Big Data, Smart Citizen oder Citizensourcing sind wichtige Voraussetzungen und bilden somit das Fundament für E-/Open-Government und Smart-City-Initiativen. Eine erste Überprüfung des Modells am Beispiel Estland zeigt, dass sich die theoretischen Konzepte durchaus im realen Umfeld wiederfinden. Um das theoretische Modell fundierter zu belegen, bedarf es weiterer empirischer Beweise, die jedoch nur durch entsprechende Projekte erbracht werden können, die von Beginn an wissenschaftlich begleitet werden. N2 - The increasing impact of information and communication technology (ICT) in the private sector is raising people’s expectation of the public sector. E-government, open government and smart city initiatives directly or indirectly address the use of ICT in the public sector. All three concepts share the huge economical potential. In order digitize the public sector in a similar way to the private sector, the relationships between these three concepts need to be examined. Therefore, relevant literature has been analyzed and guided interviews with professionals have been conducted. The result is a theoretical model, which merges the three concepts and describes their interdependency and synergies. In this model, e-government technically and organizationally cultivates the three pillars of open government: transparency, participation and collaboration. In return, open government produces acceptance of and trust into e-government, which is essential for the stakeholder’s adoption of e-government services. The consideration of the structure, goals and opportunities, prerequisites and challenges of the three concepts provides the basis for a merging of e-/open government and smart city initiatives. The e-/open government construct constitutes the smart governance, which is the foundation of every smart city initiative. The common goals of e-/open government and smart city projects are summarized as public value. The direct counterpart of public value is defined as digital divide, which represents the greatest challenge with the lack of stakeholder’s trust in governance and technology. Major concepts like big data, smart citizen or citizen sourcing provide the foundation for e-/open government and smart city initiatives. Taking Estonia as an example for an initial evaluation of the model shows that the theoretical concepts are well reflected in the real environment. In order to more profoundly validate the theoretical model, further empirical evidence is needed. This empirical evidence can only be gathered if such evaluation is part of e-/open government or smart city projects from the very beginning. KW - Smart City KW - E-Government KW - Open Government Y2 - 2019 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-28483 U6 - https://doi.org/10.26205/opus-2848 DO - https://doi.org/10.26205/opus-2848 SP - 185 S1 - 185 ER - TY - THES U1 - Bachelor Thesis A1 - Müller-Baumgart, Antonia T1 - Estimation of fuel consumption of pleasure vessels based on environmental data models Y2 - 2022 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-31988 U6 - https://doi.org/10.26205/opus-3198 DO - https://doi.org/10.26205/opus-3198 SP - 130 S1 - 130 ER - TY - THES U1 - Master Thesis A1 - Müller-Baumgart, Ulf T1 - Creation of general representation of a local power grid as a basis for an embedding of electrical devices Y2 - 2024 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37955 U6 - https://doi.org/10.26205/opus-3795 DO - https://doi.org/10.26205/opus-3795 SP - 96 S1 - 96 ER - TY - THES U1 - Master Thesis A1 - Sarangi, Jitikantha T1 - Digital Calibration, Closed Loop Regulation and Implementation of Digital Debugging Features for the Delay Asymmetry Compensation Logic of a 3D Polarization Camera Based on Time-of-Flight Principle N2 - The work presented in this thesis deals with the distance measurement aspect of a 3D Polarization ToF camera for automotive applications that uses a Time-to-Digital Converter (TDC) to measure the time interval between the emission of light from a source and its reception. Based on the measurement of the time interval, distance can be calculated by applying the equation of motion. In application, achieving an exact distance measurement is quite strenuous because the operating conditions of the design are susceptible to change due to environmental factors. Therefore, to achieve accuracy in distance measurement, the time interval between the emission and reception of light must be measured precisely. For this purpose, a delay asymmetry compensation logic is developed. This thesis elaborates the addition of debugging features, redesign of some components, digital calibration approach and the entire testbench environment of the delay asymmetry compensation logic. It also sheds light on the implementation of the designed logic for its successful realisation in real hardware. Lastly, it concludes by narrating future prospects and further scopes of development. Y2 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37323 U6 - https://doi.org/10.26205/opus-3732 DO - https://doi.org/10.26205/opus-3732 SP - 107 S1 - 107 PB - Fachhochschule Dortmund CY - Dortmund ER - TY - RPRT U1 - Forschungsbericht T1 - Open iCare Assistant BT - offene intelligente Infrastruktur zur Unterstützung von Pflegediensten in der ambulanten und stationären Pflege N2 - Forschungsbericht Projektleitung: Christo Röhrig, Thomas Felderhoff Wiss. Mitarbeit: Torben Bastert, Silke Bockhorn, Daniel Bonney, Aylin Celik, Marcel Gempf, Frank Künemund, Angela Lottis, Nicole Nennstiel, Norbert Nowak, Jan Oelker, Andreas Prösser, Daniel von Truczynski, Michael Wulf Stud. Mitarbeit: Andreas Sutorma, Matthias Wawrzik, Christian Weinbörner Kooperationspartner: FernUniversität in Hagen, Forschungsinstitut Technologie und Behinderung, Pflegedienst Hübenthal GmbH, SBO Senioreneinrichtungen Bochum gGmbH, Locate Solution GmbH, digitalSTROM AG, DÖRING Industrie Elektronik GmbH & Co. KG, Home and Life Care, devolo AG Förderung: Europäische Fonds für regionale Entwicklung, Ziel 2 Programm Y2 - 2016 U6 - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-18106 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-18106 SP - 5 S1 - 5 ER -