TY - THES U1 - Master Thesis A1 - Müller-Baumgart, Ulf T1 - Creation of general representation of a local power grid as a basis for an embedding of electrical devices Y2 - 2024 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37955 U6 - https://doi.org/10.26205/opus-3795 DO - https://doi.org/10.26205/opus-3795 SP - 96 S1 - 96 ER - TY - THES U1 - Master Thesis A1 - Alaee, Ladan T1 - Design and Implementation of a Mixed-Signal Processing Chain for the Optical Determination of Rotation Angles N2 - The aim of this master thesis is the design and implementation of mixed-signal processing chain for the optical determination of rotation angles by means of four sensors implemented as photodiodes with integrated polarization filters and a high-precision CORDIC hardware design implemented on an FPGA in Verilog. Furthermore, a light source and a polarizer are integrated in the measurement setup which is configured using an QT application. Y2 - 2024 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37932 U6 - https://doi.org/10.26205/opus-3793 DO - https://doi.org/10.26205/opus-3793 SP - 264 S1 - 264 ER - TY - THES U1 - Master Thesis A1 - García Rodríguez, Saul T1 - Design and FPGA implementation of a highly resource-efficient AES-256 encryption and decryption engine N2 - Growing demand for security in a wide range of fields gives raise to research for more efficient and modern methods. Additionally, the increase of systems that are deployed on hardware requires security to be embedded in small area to protect intellectual property, hardware, and integrity and confidentially of sensible data. Therefore, in this work a design and FPGA implementation of a highly resource-efficient AES-256 encryption and decryption engine is presented, as well as its comparison with state-of-the-art designs. The design shows a reduction in the resources used due to its architecture to reuse hardware throughout all the processing. The design is implemented on a Xilinx Artix-7 FPGA. KW - AES KW - encryption KW - security KW - FPGA KW - decryption Y2 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37471 U6 - https://doi.org/10.26205/opus-3747 DO - https://doi.org/10.26205/opus-3747 SP - 263 S1 - 263 ER - TY - THES U1 - Master Thesis A1 - Sarangi, Jitikantha T1 - Digital Calibration, Closed Loop Regulation and Implementation of Digital Debugging Features for the Delay Asymmetry Compensation Logic of a 3D Polarization Camera Based on Time-of-Flight Principle N2 - The work presented in this thesis deals with the distance measurement aspect of a 3D Polarization ToF camera for automotive applications that uses a Time-to-Digital Converter (TDC) to measure the time interval between the emission of light from a source and its reception. Based on the measurement of the time interval, distance can be calculated by applying the equation of motion. In application, achieving an exact distance measurement is quite strenuous because the operating conditions of the design are susceptible to change due to environmental factors. Therefore, to achieve accuracy in distance measurement, the time interval between the emission and reception of light must be measured precisely. For this purpose, a delay asymmetry compensation logic is developed. This thesis elaborates the addition of debugging features, redesign of some components, digital calibration approach and the entire testbench environment of the delay asymmetry compensation logic. It also sheds light on the implementation of the designed logic for its successful realisation in real hardware. Lastly, it concludes by narrating future prospects and further scopes of development. Y2 - 2023 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37323 U6 - https://doi.org/10.26205/opus-3732 DO - https://doi.org/10.26205/opus-3732 SP - 107 S1 - 107 PB - Fachhochschule Dortmund CY - Dortmund ER - TY - THES U1 - Master Thesis A1 - Grimm, David A1 - Wojtok, Andreas J. T1 - Konzeptionierung und Realisierung eines Multiagentensystems am Beispiel des Projektes InMachine N2 - Unternehmen stehen auf Grund von Globalisierung, Konkurrenzdruck und immer schneller agierenden Märkten vor der Herausforderung auf diese Veränderungen flexibel reagieren zu müssen. Unternehmen die sich schnell auf Marktveränderungen einstellen können haben einen Wettbewerbsvorteil der beibehalten werden muss. Beim verarbeitenden Gewerbe resultiert das in einer Optimierung der Produktionsplanung- und Steuerung. Um eine Optimierung der Produktionsplanung- und Steuerung vornehmen zu können muss zunächst Einblick in diese zur Verfügung stehen. Kleinen und mittelständischen Unternehmen (KMUs) sind in der Regel nicht in der Lage die Kosten und Komplexität von Softwarelösungen von Herstellern wie Siemens, Dassault, oder SAP zu handhaben. Aufgrund dessen ist es notwendig Softwarelösungen anzubieten die genau auf das Einsatzszenario in KMUs zugeschnitten sind. Ziel dieser Arbeit ist das Erstellen einer Softwarelösung, um eine Optimierung der Produktionsplanung- und Steuerung zu ermöglichen, durch Einblick und Rückmeldung der Produktionsprozesse. Um dieses Ziel zu erreichen wurden zunächst Anforderungen an das Gesamtsystem gestellt. Diese Anforderungen fließen in das zu erstellende Softwarekonzept ein. Beim Softwarekonzept wurde besonders auf die lose Koppelung der Komponenten und der flexiblen Kommunikation geachtet, dadurch ist es möglich das Softwarekonzept zukunftssicher aufzustellen und das nachträgliche Erweitern der Software zu ermöglichen. Durch die Anforderung an Unternehmen flexibel auf Marktveränderungen reagieren zu können resultiert auch die Anforderung an die eingesetzte Software flexibel auf neue Gegebenheiten angepasst werden zu können. Wird diese Anpassbarkeit bereits beim Softwarekonzept berücksichtigt können Änderungen einfacher, robuster, und zu geringeren Kosten realisiert werden. Nach der Erstellung des Softwarekonzeptes wurde dieses prototypisch Implementiert. Dieses Vorgehen sichert die Qualität und Konsistenz des Softwarekonzeptes ab. Abschließend wird eine Zusammenfassung gegeben, ein Fazit gezogen und ein Ausblick gewährt. N2 - Companies are facing the challenge to adapt their behavior and react on changes initiated through globalization, competitive pressure, and fast changing markets. Companies that are capable of changing their behavior have a competitive advantage and this advantage has to be maintained. In the manufacturing industry this results in optimizing the production planning and scheduling. To enable the possibility to optimize the production planning and scheduling you have to gain insight in the production-process. Small to medium sized companies are not capable of handling the costs and complexity of software-solutions from Siemens, Dassault, or SAP. Because of that, it is necessary to create a tailor-made software-solution that fits exactly the needs of small to medium sized companies. Our goal is to create a software-solution that is capable to support the production planning and scheduling by gaining real-time insight and feedback from the production-processes. To obtain this goal requirements for the software-solution were defined. While creating the software-concept loose coupling and flexible communication were encouraged to create a system that is future proof and easy to extend. Because companies have to be flexible, so has to be the software they are using. If this flexibility is considered while developing the software-concept, it is possible to easily extend the software to low costs. After creating the software-concept it will be implemented as a prototype. This ensures the quality and consistency of the software-concept. Finally a summary, a conclusion, and an outlook will be given. KW - multi-agent system KW - production planning KW - small and medium-sized enterprises KW - sme KW - inMachine KW - Machine-to-Machine-Kommunikation KW - Internet der Dinge KW - Klein- und Mittelbetrieb Y2 - 2017 UN - https://nbn-resolving.org/urn:nbn:de:hbz:dm13-21408 U6 - https://doi.org/10.26205/opus-2140 DO - https://doi.org/10.26205/opus-2140 SP - 110 S1 - 110 ER -