@phdthesis{Alaee2024,
  type      = {Master Thesis},
  author    = {Alaee, Ladan},
  title     = {Design and Implementation of a Mixed-Signal Processing Chain for the Optical Determination of Rotation Angles},
  doi       = {10.26205/opus-3793},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37932},
  pages     = {264},
  year      = {2024},
  abstract  = {The aim of this master thesis is the design and implementation of mixed-signal processing chain for the optical determination of rotation angles by means of four sensors implemented as photodiodes with integrated polarization filters and a high-precision CORDIC hardware design implemented on an FPGA in Verilog. Furthermore, a light source and a polarizer are integrated in the measurement setup which is configured using an QT application.},
  language  = {en}
}
@phdthesis{M{\"u}ller-Baumgart2024,
  type      = {Master Thesis},
  author    = {M{\"u}ller-Baumgart, Ulf},
  title     = {Creation of general representation of a local power grid as a basis for an embedding of electrical devices},
  doi       = {10.26205/opus-3795},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37955},
  pages     = {96},
  year      = {2024},
  language  = {en}
}
@phdthesis{Koers2024,
  type      = {Master Thesis},
  author    = {Koers, Lars},
  title     = {Setup of test environments based on a Xilinx Zynq SoC for measuring the leakage current and for radiation qualifcation of SRAM based FPGAs},
  doi       = {10.26205/opus-3803},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-38039},
  pages     = {136},
  year      = {2024},
  abstract  = {This thesis discusses the development of test environments using Xilinx Zynq System on Chip (SoC) for measuring leakage currents and radiation qualification of Static Random Access Memory (SRAM) based Field Programmable Gate Arrays (FPGAs) at European Organisation for Nuclear Research (CERN). The effects of radiation on electronic components are explained, followed by an introduction to the FPGAs used. The GateMate FPGAs leakage current is measured in its application area with respect to temperature and core voltages. A comparable testing environment is used from the tester to the tested device, as it will later be used at CERN. The GateMate is being prepared in this setup for the finalization of radiation qualification at CERN, to be transferred later. For this purpose, the basic tests are explained and the outstanding tests are then carried out. The Lattice iCE40 UltraLite FPGA is used in an initial application test to determine its suitability for further radiation qualification tests at CERN. The analysis and presentation of the test results are followed by a summary and outlook.},
  language  = {en}
}
@unpublished{LattnerGellerKluck2023,
  author    = {Lattner, Yannick and Geller, Marius and Kluck, Norbert},
  title     = {Efficiency Approximation of Centrifugal Compressors in the Cordier Diagram},
  doi       = {10.26205/opus-3366},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-33661},
  pages     = {12},
  year      = {2023},
  abstract  = {We present a simulation data-based efficiency approximation for radial turbocompressors, which is implemented in the well-known Cordier diagram. A sophisticated CAE workflow is used to calculate the operational characteristics of 50 machine designs with 50 impeller geometry variations each. A Kriging-based surrogate model is trained to approximate the efficiency of any machine designs' best geometry design. The models are implemented into a machine design workflow. As a result, duty-specific Cordier lines are introduced. They are automatically generated for a set of machine design parameters. The efficiency of the designs along the duty-specific Cordier lines is approximated. Using optimization techniques, an optimal compressor design for the given duty on every specific Cordier line may be identified. This highly increases the amount of information available in the early design stages for radial turbocompressors.},
  language  = {en}
}
@phdthesis{Jung2023,
  type      = {Master Thesis},
  author    = {Jung, Richard},
  title     = {Radiation Qualification of the Cologne Chip GateMate A1 FPGA},
  doi       = {10.26205/opus-3364},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-33643},
  pages     = {118},
  year      = {2023},
  abstract  = {In this thesis, the radiation sensitivity of the novel Cologne Chip GateMate A1 field-programmable gate array (FPGA) is evaluated. An initial introduction of radiation mechanisms and their effects on electronics is given, followed by a brief overview of radiation test standards. The common elements present in FPGAs are discussed, which is followed by details of the GateMate FPGA device and a description of the software design flow. Afterwards, the development of a purpose-built printed circuit board (PCB) for radiation tests with the GateMate FPGA is detailed. Four components of the GateMate have been tested during three radiation campaigns, as well as a benchmark circuit to compare the radiation performance of the GateMate with other FPGAs tested at the European Organization for Nuclear Research (CERN). The test architecture consists of the device under test (DUT) FPGA and a TESTER FPGA whose task is to provide inputs to the DUT and record its response. The DUT and TESTER designs developed for all tests are discussed in detail. Finally, the results obtained during the irradiation campaigns are presented, showing that the GateMate FPGA performs similarly to other FPGAs using the same process technology. Only the benchmark test was not finalized, as implementation problems prevented its completion in the given time frame. The thesis concludes with a comprehensive summary and outlook.},
  language  = {en}
}
@article{LattnerGeller2023,
  author    = {Lattner, Yannick and Geller, Marius},
  title     = {Radial Turbocompressor Chord Length Approximation for the Reynold's Number Calculation},
  doi       = {10.26205/opus-3335},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-33351},
  year      = {2023},
  abstract  = {We present an approximation model for the chord length of radial turbocompressors. The model enables the calculation of a compressor's chord Reynold's number during the machine design process. The chord Reynold's number is shown to be the most accurate representation of the fluid dynamic properties inside the radial turbocompressor's impeller. It — however — requires the computation of the chord length, which is only available after defining the final impeller geometry. The method presenting in this paper only employs the compressors principal dimensions to approximate the chord length. The chord is modelled using a B{\´e}zier spline and quarter ellipse. This enables the earlier use of the chord Reynold's number during the machine design process of radial turbocompressors.},
  language  = {en}
}
@phdthesis{Sarangi2023,
  type      = {Master Thesis},
  author    = {Sarangi, Jitikantha},
  title     = {Digital Calibration, Closed Loop Regulation and Implementation of Digital Debugging Features for the Delay Asymmetry Compensation Logic of a 3D Polarization Camera Based on Time-of-Flight Principle},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  doi       = {10.26205/opus-3732},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37323},
  pages     = {107},
  year      = {2023},
  abstract  = {The work presented in this thesis deals with the distance measurement aspect of a 3D Polarization ToF camera for automotive applications that uses a Time-to-Digital Converter (TDC) to measure the time interval between the emission of light from a source and its reception. Based on the measurement of the time interval, distance can be calculated by applying the equation of motion. In application, achieving an exact distance measurement is quite strenuous because the operating conditions of the design are susceptible to change due to environmental factors. Therefore, to achieve accuracy in distance measurement, the time interval between the emission and reception of light must be measured precisely. For this purpose, a delay asymmetry compensation logic is developed. This thesis elaborates the addition of debugging features, redesign of some components, digital calibration approach and the entire testbench environment of the delay asymmetry compensation logic. It also sheds light on the implementation of the designed logic for its successful realisation in real hardware. Lastly, it concludes by narrating future prospects and further scopes of development.},
  language  = {en}
}
@techreport{Vormann2023,
  type      = {Working Paper},
  author    = {Vormann, Claus},
  title     = {Say what you pay? Pay Information Disclosure in German Job Postings},
  doi       = {10.26205/opus-3740},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37407},
  pages     = {13},
  year      = {2023},
  abstract  = {Purpose - Pay transparency is a promising topic both for research and practice. In particular, the new European directive on compensation transparency will increase its importance. However, research is still relatively sparse compared to other areas of HRM. In particular, state-of-the-art and use of pay information disclosure in job postings is neglected. This paper aims to shed light on this HRM topic. Methodology - The paper summarizes the findings of a preliminary study conducted among German companies researching the proportion of firms offering compensation information in job postings and digging into the reasons behind it. Findings - Only 17 \% of the participating companies disclose meaningful information about compensation in their job postings. Doing so mainly depends on the company's attitude towards pay transparency. The age of the company has a minor negative influence, i.e.~older companies are less prone to disclose salary information. Industry, size, and existing overall pay transparency in the company do not determine if pay information is disclosed in job postings. Research limitations - The main limitation of this survey is its small size of 88 participants and the snowball sampling approach employed. This limits its representativeness and calls for follow-up studies involving more companies and a wider variation of positions included. Practical implications - While the EU directive will make it obligatory to communicate about pay before the first interview, some companies do it already. The study helps HR departments that think about changing their practice before it becomes compulsory to better judge the current standards.},
  language  = {en}
}
@phdthesis{Garc{\´i}a Rodr{\´i}guez2023,
  type      = {Master Thesis},
  author    = {Garc{\´i}a Rodr{\´i}guez, Saul},
  title     = {Design and FPGA implementation of a highly resource-efficient AES-256 encryption and decryption engine},
  doi       = {10.26205/opus-3747},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37471},
  pages     = {263},
  year      = {2023},
  abstract  = {Growing demand for security in a wide range of fields gives raise to research for more efficient and modern methods. Additionally, the increase of systems that are deployed on hardware requires security to be embedded in small area to protect intellectual property, hardware, and integrity and confidentially of sensible data. Therefore, in this work a design and FPGA implementation of a highly resource-efficient AES-256 encryption and decryption engine is presented, as well as its comparison with state-of-the-art designs. The design shows a reduction in the resources used due to its architecture to reuse hardware throughout all the processing. The design is implemented on a Xilinx Artix-7 FPGA.},
  language  = {en}
}
@incollection{CopeiEickhoffMaliketal.2022,
  author    = {Copei, Sebastian and Eickhoff, Christoph and Malik, Adam and Nolte, Natascha and Norbisrath, Ulrich and Sorgalla, Jonas and Weber, Jens and Z{\"u}ndorf, Albert},
  title     = {From monolithic models to agile micromodels},
  series = {Proceedings of the 10th International Conference on Model-Driven Engineering and Software Development},
  publisher = {SciTePress},
  address   = {Set{\´u}bal},
  pages     = {227 -- 233},
  year      = {2022},
  language  = {en}
}
@phdthesis{Shi2022,
  type      = {Master Thesis},
  author    = {Shi, Yanchen},
  title     = {Power Simulation of a MIPS microAptiv UP Core implemented as a virtual ASIC prototype in a 65nm CMOS technology},
  doi       = {10.26205/opus-3217},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-32171},
  pages     = {93},
  year      = {2022},
  abstract  = {This thesis presents a power simulation of a MIPS MicroAptiv UP Core implemented as a virtual ASIC prototype using Taiwan Semiconductor Manufacturing Company(TSMC) 65 nm CMOS technology. Based on the MIPS instruction set program data is generated and introduced in the simulation by means of initialization files. Before the simulation, technology specific SRAM modules are integrated into theMIPS core. Two different programs are used for power characterization. The first program performs frequent memory accesses by means of load/store word instructions, while the second program is a loop which operates on registers only and mainly increments addresses. The simulation is based on a virtual prototype which is generated by synthesis and place \& route including post-layout parasitic extractions. The stimuli for the power extraction is generated via gate-level simulation and forwarded to the power calculation engine. The effect of X-propagation on gate-level simulations is avoided by modifying the address-related statements in the execution data path module, which use another form of 2 to 1 multiplexer, setting the output to zero for all input signals even with an initial value of 'x' without changing the functionality. Finally, the consumed power is provided by reports generated by the power simulation engine. The memory-centric program consumes 35.39mW of internal power using instructions, which is 0.73mW less than the internal power of the register-centric program, and the overall average power is also lower by almost 0.7mW.},
  language  = {en}
}
@incollection{Seco de HerreraIonescuM{\"u}lleretal.2022,
  author    = {Seco de Herrera, Alba G. and Ionescu, Bogdan and M{\"u}ller, Henning and P{\´e}teri, Renaud and Ben Abacha, Asma and Friedrich, Christoph M. and R{\"u}ckert, Johannes and Bloch, Louise and Br{\"u}ngel, Raphael and Idrissi-Yaghir, Ahmad and Sch{\"a}fer, Henning and Kozlovski, Serge and Dicente Cid, Yashin and Kovalev, Vassili and Chamberlain, Jon and Clark, Adrian and Campello, Antonio and Schindler, Hugo and Deshayes, J{\´e}rome and Popescu, Adrian and Ştefan, Liviu-Daniel and Constantin, Mihai Gabriel and Dogariu, Mihai},
  title     = {ImageCLEF 2022: multimedia retrieval in medical, nature, fusion and internet applications},
  series = {Advances in Information Retrieval: 44th European Conference on IR Research, ECIR 2022, Stavanger, Norway, April 10-14, 2022, Proceedings, Part II},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {382 -- 389},
  year      = {2022},
  language  = {en}
}
@book{OPUS4-3268,
  title     = {The history of graphic design},
  editor    = {M{\"u}ller, Jens and Wiedemann, Julius},
  publisher = {Taschen},
  address   = {K{\"o}ln},
  isbn      = {978-3-8365-8806-5},
  pages     = {511},
  year      = {2022},
  language  = {en}
}
@article{BrumannKukuk2022,
  author    = {Brumann, Christopher and Kukuk, Markus},
  title     = {Evolution based single camera resectioning based on distance maps of a known geometry for Squash sports},
  series = {IEEE Access},
  issn      = {2169-3536},
  pages     = {58136 -- 58150},
  year      = {2022},
  language  = {en}
}
@article{KremerKhaniAppeletal.2022,
  author    = {Kremer, Robert and Khani, Somayeh and Appel, Tamara and Palkowski, Heinz and Foadian, Farzad},
  title     = {Selective laser melting of CuSn10: simulation of mechanical properties, microstructure, and residual stresses},
  series = {Materials},
  volume    = {15 (2022)},
  number    = {11},
  issn      = {1996-1944},
  pages     = {1 -- 13},
  year      = {2022},
  language  = {en}
}
@article{Guias2022,
  author    = {Guias, Flavius},
  title     = {On efficacy and effectiveness of vaccines},
  series = {Spora : a journal of biomathematics},
  volume    = {8 (2022)},
  issn      = {2473-5493},
  pages     = {56 -- 60},
  year      = {2022},
  language  = {en}
}
@phdthesis{M{\"u}ller-Baumgart2022,
  type      = {Bachelor Thesis},
  author    = {M{\"u}ller-Baumgart, Antonia},
  title     = {Estimation of fuel consumption of pleasure vessels based on environmental data models},
  doi       = {10.26205/opus-3198},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-31988},
  pages     = {130},
  year      = {2022},
  language  = {en}
}
@incollection{M{\"u}ller2022,
  author    = {M{\"u}ller, Jens},
  title     = {A contribution to the history of graphic design},
  series = {F{\´e}lix Beltr{\´a}n - visual intelligence: graphic design in a social sense},
  publisher = {Optik Books},
  address   = {Dortmund},
  pages     = {8 -- 9},
  year      = {2022},
  language  = {en}
}
@incollection{BlochFriedrich2021,
  author    = {Bloch, Louise and Friedrich, Christoph},
  title     = {Developing a machine learning workflow to explain black-box models for Alzheimer's disease classification},
  series = {BIOSTEC 2021 : proceedings of the 14th International Joint Conference on Biomedical Engineering Systems and Technologies : online streaming, February 11-13, 2021},
  publisher = {SCITEPRESS - Science and Technology Publications},
  address   = {S{\´e}tubal},
  pages     = {87 -- 99},
  year      = {2021},
  language  = {en}
}
@incollection{BlochFriedrich2021,
  author    = {Bloch, Louise and Friedrich, Christoph},
  title     = {Using Bayesian optimization to effectively tune random forest and XGBoost hyperparameters for early Alzheimer's disease diagnosis},
  series = {Wireless Mobile Communication and Healthcare : 9th EAI International Conference, MobiHealth 2020, Virtual Event, November 19, 2020, Proceedings},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {285 -- 299},
  year      = {2021},
  language  = {en}
}
@article{Scorzin2021,
  author    = {Scorzin, Pamela C.},
  title     = {As real as Rihanna? - the curious case of Miquela Sousa},
  series = {Slanted},
  volume    = {2021},
  number    = {37},
  issn      = {1867-6510},
  pages     = {100 -- 105},
  year      = {2021},
  language  = {en}
}
@article{KotthausSch{\"a}ferStankovicetal.2021,
  author    = {Kotthaus, Jochem and Sch{\"a}fer, Matthias and Stankovic, Nikola and Weitzel, Gerrit},
  title     = {How soccer becomes politics},
  series = {International journal of sport communication},
  volume    = {14 (2021)},
  number    = {3},
  issn      = {1936-3915},
  pages     = {428 -- 447},
  year      = {2021},
  language  = {en}
}
@incollection{KotthausKrampePionteketal.2021,
  author    = {Kotthaus, Jochem and Krampe, Karsten and Piontek, Andrea and Weitzel, Gerrit},
  title     = {How to make the cut in academia},
  series = {Researchers at risk : precarity, jeopardy and uncertainty in academia},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {131 -- 146},
  year      = {2021},
  language  = {en}
}
@article{BoeckerRanigaMthembu2021,
  author    = {Boecker, Michael and Raniga, Tanusha and Mthembu, Maud},
  title     = {Single mothers in South Africa and Germany in formal employment contexts},
  series = {Open Gender Journal},
  volume    = {5 (2021)},
  number    = {1},
  issn      = {2512-5192},
  year      = {2021},
  language  = {en}
}
@article{Boecker2021,
  author    = {Boecker, Michael},
  title     = {The social and cultural construction of disability in the Global South},
  series = {Behinderung und Internationale Entwicklung = Disability and International Development},
  volume    = {32 (2021)},
  number    = {1},
  issn      = {2191-6888},
  pages     = {18 -- 23},
  year      = {2021},
  language  = {en}
}
@article{Gr{\"a}ßerTeschSchmittetal.2021,
  author    = {Gr{\"a}ßer, Felix and Tesch, Falko and Schmitt, Jochen and Abraham, Susanne and Malberg, Hagen and Zaunseder, Sebastian},
  title     = {A pharmaceutical therapy recommender system enabling shared decision-making},
  series = {User Modeling and User-Adapted Interaction},
  volume    = {2021},
  issn      = {0924-1868},
  year      = {2021},
  language  = {en}
}
@article{BrumannKukukReinsberger2021,
  author    = {Brumann, Christopher and Kukuk, Markus and Reinsberger, Claus},
  title     = {Evaluation of open-source and pre-trained deep convolutional neural networks suitable for player detection and motion analysis in squash},
  series = {Sensors},
  volume    = {2021},
  number    = {21(13)},
  issn      = {1424-8220},
  pages     = {1 -- 25},
  year      = {2021},
  language  = {en}
}
@phdthesis{Richter2021,
  author    = {Richter, Nadine},
  title     = {Being mindful, living sustainable: relationships between mindfulness, well-being and pro-environmental behavior},
  pages     = {V, 182},
  year      = {2021},
  language  = {en}
}
@article{Gr{\"a}ßerTeschSchmittetal.2021,
  author    = {Gr{\"a}ßer, Felix and Tesch, Falko and Schmitt, Jochen and Abraham, Susanne and Malberg, Hagen and Zaunseder, Sebastian},
  title     = {A pharmaceutical therapy recommender system enabling shared decision-making},
  series = {User Modeling and User-Adapted Interaction},
  issn      = {0924-1868},
  year      = {2021},
  language  = {en}
}
@phdthesis{Werk2021,
  author    = {Werk, Katharina},
  title     = {Risk-taking behavior as a hidden factor for sustainable business models' performance of European banks},
  pages     = {xxiv, 299},
  year      = {2021},
  language  = {en}
}
@article{KuhntBecker-EmdenSchadeetal.2021,
  author    = {Kuhnt, Sonja and Becker-Emden, Eva-Christina and Schade, Tim and Eden, Wolfgang and Middendorf, Bernhard},
  title     = {Use of optimal mixture-process designs and response-surface models to study properties of calcium silicate units},
  series = {Quality and Reliability Engineering International},
  volume    = {37 (2021)},
  number    = {2},
  issn      = {0748-8017},
  pages     = {391 -- 408},
  year      = {2021},
  language  = {en}
}
@incollection{TillmannBaumannBrinkhoffetal.2021,
  author    = {Tillmann, W. and Baumann, I. and Brinkhoff, A. and Kuhnt, Sonja and Becker-Emden, Eva-Christina and Kalka, A.},
  title     = {Effect of the spray parameters on the particle behavior and the coating properties during ID warm spraying of fine WC-12Co powders (-10 + 2 μm)},
  series = {Thermal Spray 2021 : proceedings from the international thermal spray conference},
  publisher = {ASM},
  address   = {Kinsman Road, OH},
  pages     = {283 -- 289},
  year      = {2021},
  language  = {en}
}
@article{GrahamClarkeWuetal.2021,
  author    = {Graham, Sarah E. and Clarke, Shoa L. and Wu, Kuan-Han H. and Kanoni, Stavroula and Arendt, Marina},
  title     = {The power of genetic diversity in genome-wide association studies of lipids},
  series = {Nature},
  volume    = {600 (2021)},
  issn      = {1476-4687},
  pages     = {675 -- 679},
  year      = {2021},
  language  = {en}
}
@article{Fischer2021,
  author    = {Fischer, Ute},
  title     = {Rolling back or liberation?},
  series = {European Green Perspectives on Basic Income},
  volume    = {2021},
  number    = {2},
  pages     = {25 -- 29},
  year      = {2021},
  language  = {en}
}
@article{KregelStemannKochetal.2021,
  author    = {Kregel, Ingo and Stemann, Dietmar and Koch, Julian and Coners, Andr{\´e}},
  title     = {Process mining for Six Sigma: utilising digital traces},
  series = {Computers \& industrial engineering},
  volume    = {62 (2021)},
  number    = {153},
  issn      = {0360-8352},
  year      = {2021},
  language  = {en}
}
@book{OPUS4-3120,
  title     = {100 poster battle 2020-2021},
  editor    = {Harmsen, Lars},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  isbn      = {978-3-948440-29-9},
  pages     = {243},
  year      = {2021},
  language  = {en}
}
@article{PielmusM{\"u}hlstefBreschetal.2021,
  author    = {Pielmus, Alexandru-Gabriel and M{\"u}hlstef, Jens and Bresch, Erik and Glos, Martin and Jungen, Christiane and Mieke, Stefan and Orglmeister, Reinhold and Schulze, Andreas and Stender, Birgit and Voigt, Verena and Zaunseder, Sebastian},
  title     = {Surrogate based continuous noninvasive blood pressure measurement},
  series = {Biomedical Engineering},
  volume    = {66 (2021)},
  number    = {3},
  issn      = {0013-5585},
  pages     = {231 -- 246},
  year      = {2021},
  language  = {en}
}
@article{WoyczykFleischhauerZaunseder2021,
  author    = {Woyczyk, Alexander and Fleischhauer, Vincent and Zaunseder, Sebastian},
  title     = {Adaptive Gaussian mixture model driven level set segmentation for remote pulse rate detection},
  series = {IEEE Journal of Biomedical and Health Informatics},
  volume    = {25 (2021)},
  number    = {5},
  issn      = {2168-2194},
  pages     = {1361 -- 1372},
  year      = {2021},
  language  = {en}
}
@book{OPUS4-3122,
  title     = {Dortmund International Research Conference 2021 : conference proceedings},
  editor    = {Olivos, Mariella and Reimann, Christian and Weyers, Stephan and Wolff, Carsten},
  publisher = {Fachhochschule Dortmund, IDiAL - Institute for the Digital Transformation of Application and Living Domains},
  address   = {Dortmun},
  isbn      = {978-3-948228-02-6},
  pages     = {311},
  year      = {2021},
  language  = {en}
}
@article{KochPlattfautKregel2021,
  author    = {Koch, Julian and Plattfaut, Ralf and Kregel, Ingo},
  title     = {Looking for talent in times of crisis},
  series = {International journal of information management data insights},
  volume    = {1 (2021)},
  number    = {2},
  issn      = {2667-0968},
  pages     = {12},
  year      = {2021},
  language  = {en}
}
@article{KregelKochPlattfaut2021,
  author    = {Kregel, Ingo and Koch, Julian and Plattfaut, Ralf},
  title     = {Beyond the hype},
  series = {Journal of organizational computing and electronic commerce},
  issn      = {1532-7744},
  year      = {2021},
  language  = {en}
}
@book{OPUS4-3161,
  title     = {Two cities - Tehran/Dortmund},
  editor    = {Winde, J{\"o}rg},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  pages     = {123},
  year      = {2021},
  language  = {en}
}
@article{Scorzin2021,
  author    = {Scorzin, Pamela C.},
  title     = {On the contemporary scenopolitics},
  series = {Art Style : Art \& Culture International Magazine},
  volume    = {8 (2021)},
  number    = {1},
  issn      = {2596-1802},
  pages     = {71 -- 85},
  year      = {2021},
  language  = {en}
}
@phdthesis{Spicher2020,
  author    = {Spicher, Nicolai},
  title     = {Time-frequency analysis of optical and electrical cardiac signals with applications in ultra-high-field MRI},
  pages     = {177},
  year      = {2020},
  language  = {en}
}
@article{HuneckeGrothWittowsky2020,
  author    = {Hunecke, Marcel and Groth, S{\"o}ren and Wittowsky, Dirk},
  title     = {Young social milieus and multimodality: interrelations of travel behaviours and psychographic characteristics},
  series = {Mobilities},
  volume    = {15 (2020)},
  number    = {3},
  issn      = {1745-0101},
  pages     = {397 -- 415},
  year      = {2020},
  language  = {en}
}
@article{MeyerRichterHartung-Beck2020,
  author    = {Meyer, Andr{\´e} and Richter, Dirk and Hartung-Beck, Viola},
  title     = {The relationship between principal leadership and teacher collaboration: investigant the mediating effect of teachers' collective efficacy},
  series = {Educational management administration \& leadership},
  volume    = {2020},
  issn      = {1741-1440},
  year      = {2020},
  language  = {en}
}
@article{Kotthaus2020,
  author    = {Kotthaus, Jochem},
  title     = {The religious experience of setting off emergency flares?},
  series = {Schutzian Research},
  volume    = {12 (2020)},
  issn      = {2067-0621},
  pages     = {125 -- 154},
  year      = {2020},
  language  = {en}
}
@incollection{BlejaWiewelhoveGrossmannetal.2020,
  author    = {Bleja, Jelena and Wiewelhove, Dominik and Grossmann, Uwe and M{\"o}rz, Elisabetta},
  title     = {Collaborative business model structures for wireless ambient assisted living systems},
  series = {IEEE International Symposium on Wireless Systems (IDAACS-SWS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@article{BlejaWiewelhoveKruegeretal.2020,
  author    = {Bleja, Jelena and Wiewelhove, Dominik and Krueger, T. and Grossmann, Uwe},
  title     = {User acceptance and evaluation of ambient assisted living systems},
  series = {Gerontechnology : official journal of the international society for gerontechnology},
  volume    = {19 (2020)},
  issn      = {1569-1101},
  year      = {2020},
  language  = {en}
}
@article{Bakkervan der SpekFriedrich2020,
  author    = {Bakker, Mark K. and van der Spek, Rick A. A. and Friedrich, Christoph M.},
  title     = {Genome-wide association study of intracarnial aneurysms identifies 17 risk loci and genetic overlap with clinical risk factors},
  series = {Nature Genetics},
  volume    = {2020},
  number    = {12},
  issn      = {1061-4036},
  pages     = {1303 -- 1313},
  year      = {2020},
  language  = {en}
}
@article{MechWohllebenGhanemetal.2020,
  author    = {Mech, Agnieszka and Wohlleben, Wendel and Ghanem, Antoine and Hodoroaba, Vasile-Dan and Weigel, Stefan and Babick, Frank and Br{\"u}ngel, Raphael and Friedrich, Christoph M. and Rasmussen, Kirsten and Rauscher, Hubert},
  title     = {Nano or not nano? A structured approach for identifying nanomaterials according to the European Commission's definition},
  series = {Small},
  volume    = {16 (2020)},
  number    = {36},
  issn      = {1613-6810},
  year      = {2020},
  language  = {en}
}
@article{Guias2020,
  author    = {Guias, Flavius},
  title     = {Numerical simulation of a modified SIR model fitting statistical data for COVID-19},
  series = {WSEAS Transactions on Computer Research},
  volume    = {8 (2020)},
  issn      = {1991-8755},
  pages     = {115 -- 125},
  year      = {2020},
  language  = {en}
}
@article{PelkaFriedrichNensaetal.2020,
  author    = {Pelka, Obioma and Friedrich, Christoph M. and Nensa, Felix and M{\"o}nninghoff, Christoph and Bloch, Louise and J{\"o}ckel, Karl-Heinz and Schramm, Sara and Sanchez Hoffmann, Sarah and Winkler, Angela and Weimar, Christian and Jokisch, Martha},
  title     = {Sociodemographic data and APOE-ε4 augmentation for MRI-based detection of amnestic mild cognitive impairment using deep learning systems},
  series = {PLoS ONE},
  volume    = {2020},
  issn      = {1932-6203},
  year      = {2020},
  language  = {en}
}
@incollection{BlochBokettaKeibeletal.2020,
  author    = {Bloch, Louise and Boketta, Adrian and Keibel, Christopher and Mense, Eric and Michailutschenko, Alex and Pelka, Obioma and R{\"u}ckert, Johannes and Willemeit, Leon and Friedrich, Christoph M.},
  title     = {Combination of image and location information for snake species identification using object detection and EfficientNets},
  series = {CLEF 2020: CLEF 2020 working notes : working notes of CLEF 2020 - Conference and Labs of the Evaluation Forum : Thessaloniki, Greece, September 22-25, 202},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  year      = {2020},
  language  = {en}
}
@article{RichterHunecke2020,
  author    = {Richter, Nadine and Hunecke, Marcel},
  title     = {Facets of mindfulness in stages of behavior change toward organic food consumption},
  series = {Mindfulness},
  volume    = {11 (2020)},
  number    = {6},
  issn      = {1868-8527},
  pages     = {1354 -- 1369},
  year      = {2020},
  language  = {en}
}
@article{BeharLiuKotzenetal.2020,
  author    = {Behar, Joachim A. and Liu, Chengyu and Kotzen, Kevin and Tsutsui, Kenta and Corino, Valentina D. A. and Singh, Janmajay and Pimentel, Marco A. F. and Warrick, Philip and Zaunseder, Sebastian and Andreotti, Fernando},
  title     = {Remote health diagnosis and monitoring in the time of COVID-19},
  series = {Physiological Measurement},
  volume    = {41 (2020)},
  number    = {10},
  issn      = {1361-6579},
  year      = {2020},
  language  = {en}
}
@article{WichertRabsteinStangetal.2020,
  author    = {Wichert, Katharina and Rabstein, Sylvia and Stang, Andreas and Erbel, Raimund and Eisele, Lewin and Arendt, Marina and Dragano, Nico and Hoffmann, Wolfgang and Lerch, Markus M. and Roskoden, Frederick Charles and Schmidt, Carsten Oliver and V{\"o}lzke, Henry and J{\"o}ckel, Karl-Heinz and Br{\"u}ning, Thomas and Behrens, Thomas},
  title     = {Associations between shift work and risk of colorectal cancer in two German cohort studies},
  series = {Chronobiology International : the journal of biological and medical rhythm research},
  volume    = {37 (2020)},
  number    = {8},
  issn      = {1525-6073},
  pages     = {1235 -- 1243},
  year      = {2020},
  language  = {en}
}
@incollection{HeßR{\"o}hrig2020,
  author    = {Heß, Daniel and R{\"o}hrig, Christof},
  title     = {Robust and precise localization of mobile robots using EFIR estimation for fusing odometry with position measurements},
  series = {52nd International Symposium on Robotics : 9-10 December 2020, Online-Event, Germany},
  publisher = {VDE Verlag},
  address   = {Berlin ; Offenbach},
  pages     = {37 -- 43},
  year      = {2020},
  language  = {en}
}
@article{Guias2020,
  author    = {Guias, Flavius},
  title     = {Effects of the reproduction number in a SEIIRD model describing the time evolution of COVID-19 at country level},
  series = {WSEAS Transactions on Computer Research},
  volume    = {19 (2020)},
  issn      = {1991-8755},
  pages     = {292 -- 297},
  year      = {2020},
  language  = {en}
}
@article{KoitkaKimQuetal.2020,
  author    = {Koitka, Sven and Kim, Moon S. and Qu, Ming and Fischer, Asja and Friedrich, Christoph M. and Nensa, Felix},
  title     = {Mimicking the radiologists' workflow: estimating pediatric hand bone age with stacked deep neural networks},
  series = {Medical Image Analysis},
  volume    = {64 (2020)},
  issn      = {1361-8415},
  year      = {2020},
  language  = {en}
}
@inproceedings{OPUS4-3078,
  title     = {Dortmund International Research Conference 2020 : Conference Proceedings},
  editor    = {Wolff, Carsten and Reimann, Christian},
  publisher = {Fachhochschule Dormund},
  address   = {Dortmund},
  isbn      = {978-3-948228-01-9},
  pages     = {288},
  year      = {2020},
  language  = {en}
}
@phdthesis{Deitelhoff2020,
  author    = {Deitelhoff, Fabian},
  title     = {Developing eye tracking methods for detecting source code comprehension strategies},
  pages     = {XII, 236},
  year      = {2020},
  language  = {en}
}
@incollection{Br{\"u}ckner2020,
  author    = {Br{\"u}ckner, Ulrike},
  title     = {The role of education for good design},
  series = {Design and arts for future now},
  publisher = {Esad College of Art and Design},
  address   = {Matosinhos},
  pages     = {68 -- 87},
  year      = {2020},
  language  = {en}
}
@article{P{\"o}geDennertKoppeetal.2020,
  author    = {P{\"o}ge, Kathleen and Dennert, Gabriele and Koppe, Uwe and G{\"u}ldenring, Annette and Matthigack, Ev B. and Rommel, Alexander},
  title     = {The health of lesbian, gay, bisexual, transgender and intersex people},
  series = {Journal of Health Monitoring},
  volume    = {2020},
  number    = {5 (S1)},
  issn      = {2511-2708},
  pages     = {1 -- 27},
  year      = {2020},
  language  = {en}
}
@article{Scorzin2020,
  author    = {Scorzin, Pamela C.},
  title     = {Orbital art in the age of internet and space flight: from terrestrial to orbital perspectives},
  series = {Art Sytle - Art \& Culture international magazine},
  volume    = {2020},
  number    = {5},
  issn      = {2596-1802},
  pages     = {25 -- 49},
  year      = {2020},
  language  = {en}
}
@misc{OPUS4-2898,
  title     = {Voltaire - Migration},
  series = {Voltaire Magazin},
  number    = {7},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  pages     = {188},
  year      = {2020},
  language  = {en}
}
@article{NeisenSchulte-Mattler2020,
  author    = {Neisen, Martin and Schulte-Mattler, Hermann},
  title     = {CRD V/CRR II: a comprehensive synopsis of the first European step towards implementing Basel IV (part I)},
  series = {Journal of risk management in financial institutions},
  volume    = {13 (2020)},
  number    = {2},
  issn      = {1752-8887},
  pages     = {114 -- 125},
  year      = {2020},
  language  = {en}
}
@article{NeisenSchulte-Mattler2020,
  author    = {Neisen, Martin and Schulte-Mattler, Hermann},
  title     = {CRD V/CRR II: a comprehensive synopsis of the first European step towards implementing Basel IV (part II)},
  series = {Journal of risk management in financial institutions},
  volume    = {13 (2020)},
  number    = {3},
  issn      = {1752-8887},
  pages     = {224 -- 241},
  year      = {2020},
  language  = {en}
}
@incollection{BlejaLangerGrossmannetal.2020,
  author    = {Bleja, Jelena and Langer, Henrike and Grossmann, Uwe and M{\"o}rz, Elisabetta},
  title     = {Smart cities for everyone},
  series = {2020 IEEE European Technology and Engineering Management Summit (E-TEMS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@incollection{R{\"o}hrigHeß2020,
  author    = {R{\"o}hrig, Christof and Heß, Daniel},
  title     = {Mobile manipulation for human-robot collaboration in intralogistics},
  series = {IAENG transactions on engineering sciences : special Issue for the International Association of Engineers conferences 2019},
  publisher = {World Scientific},
  address   = {New Jersey u. a.},
  pages     = {1 -- 20},
  year      = {2020},
  language  = {en}
}
@incollection{SchmelterF{\"u}hnerR{\"o}hrig2020,
  author    = {Schmelter, Steffen and F{\"u}hner, Claus and R{\"o}hrig, Christof},
  title     = {Container filling level estimation using vibration resonance behavior},
  series = {2020 IEEE 5th International Symposium on Smart and Wireless Systems within the Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS-SWS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@incollection{BlejaLangerGrossmannetal.2020,
  author    = {Bleja, Jelena and Langer, Henrike and Grossmann, Uwe and M{\"o}rz, Elisabetta},
  title     = {Ambient assisted living - an integral part of future smart cities},
  series = {IEEE European Technology and Engineering Management Summit (E-TEMS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@article{BongertW{\"u}stStrauchetal.2020,
  author    = {Bongert, Markus and W{\"u}st, Jan and Strauch, Justus and Buchwald, Dirk},
  title     = {Proof of concept for ozone-based disinfection of heater cooler units},
  series = {Current directions in biomedical engineering},
  volume    = {6 (2020)},
  number    = {3},
  issn      = {2364-5504},
  year      = {2020},
  language  = {en}
}
@incollection{SorgallaSachwehZ{\"u}ndorf2020,
  author    = {Sorgalla, Jonas and Sachweh, Sabine and Z{\"u}ndorf, Albert},
  title     = {Exploring the microservice development process in small and medium-sized organizations},
  series = {Product-focused software process improvement : 21st International Conference, PROFES 2020, Turin, Italy, November 25-27, 2020, proceedings},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {453 -- 460},
  year      = {2020},
  language  = {en}
}
@incollection{LokeshwaraChandura PoovaiahKolteetal.2020,
  author    = {Lokeshwara, Shankar and Chandura Poovaiah, Naveen Chengappa and Kolte, Shambhavi and Krawczyk, Lukas},
  title     = {Performance effective task scheduling with duplication - PETSD},
  series = {2020 IEEE 5th international symposium on smart and wireless systems within the conferences on intelligent data acquisition and advanced computing systems (IDAACS-SWS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@incollection{BazzalKrawczykGovindarajanetal.2020,
  author    = {Bazzal, Mahmoud and Krawczyk, Lukas and Govindarajan, Ram Prasath and Wolff, Carsten},
  title     = {Timing analysis of car-to-car communication systems using real-time calculus},
  series = {2020 IEEE 5th international symposium on smart and wireless systems within the conferences on intelligent data acquisition and advanced computing systems (IDAACS-SWS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@article{JahnHeßStampaetal.2020,
  author    = {Jahn, Uwe and Heß, Daniel and Stampa, Merlin and Sutorma, Andreas and R{\"o}hrig, Christof and Schulz, Peter and Wolff, Carsten},
  title     = {A taxonomy for mobile robots: types, applications, capabilities, implementations, requirements, and challenges},
  series = {Robotics},
  volume    = {9 (2020)},
  number    = {4},
  issn      = {2218-6581},
  pages     = {109 -- 109},
  year      = {2020},
  language  = {en}
}
@incollection{StampaSutormaJahnetal.2020,
  author    = {Stampa, Merlin and Sutorma, Andreas and Jahn, Uwe and Willich, Felix and Pratzler-Wanczura, Sylvia and Thiem, J{\"o}rg and R{\"o}hrig, Christof and Wolff, Carsten},
  title     = {A scenario for a multi-UAV mapping and surveillance system in emergency response applications},
  series = {2020 IEEE 5th international symposium on smart and wireless systems within the conferences on intelligent data acquisition and advanced computing systems (IDAACS-SWS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@book{NielsenBergerGilutzetal.2019,
  author    = {Nielsen, Jakob and Berger, J. M. and Gilutz, Shuli and Whitenton, Kathryn},
  title     = {Return on Investment (ROI) for Usability},
  publisher = {Nielsen Norman Group},
  address   = {Fremont, CA},
  pages     = {217},
  year      = {2019},
  abstract  = {Learn techniques for estimating the cost of usability activities and measuring improvements based on hundreds of development projects and 72 case studies. We present techniques for converting usage metrics into business gains for different industries (e.g., intranets, e-commerce, marketing, software, and electronics and hardware products). This 212-page report includes 131 screenshots of before and after designs, and discussions of design elements that increase business metrics.},
  language  = {en}
}
@article{BandelowHartmannHornung2019,
  author    = {Bandelow, Nils and Hartmann, Anja and Hornung, Johanna},
  title     = {Winter is coming - but not yet},
  series = {German Politics},
  volume    = {28 (2019)},
  number    = {1},
  issn      = {0964-4008},
  year      = {2019},
  language  = {en}
}
@article{BlomeM{\"o}llerB{\"o}ning2019,
  author    = {Blome, Frerk and M{\"o}ller, Christina and B{\"o}ning, Anja},
  title     = {Open House? - Class-specific career opportunities within German universities},
  series = {Social Inclusion},
  volume    = {7 (2019)},
  number    = {1},
  issn      = {2183-2803},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-20184},
  pages     = {101 -- 110},
  year      = {2019},
  abstract  = {This article focuses on the development of class-specific inequalities within German universities. Based on data on the social origin of students, doctoral students, and professors in the long-term cross-section, the article views the empirically observable dynamic of social closure of higher education since the 1950s. The focus of interest is on the level of the professorship. Data show that career conditions for underprivileged groups have deteriorated again. This finding is discussed in the context of social closure theories. The article argues that closure theories consider social closure processes primarily as intentional patterns of action, aimed at a strategic monopolization of participation, and securing social power. Such an analytical approach means that unintended closure processes remain understudied. Our conclusion is that concealed modes of reproduction of social structures ought to be examined and theorized more intensively due to their importance for the elimination of social inequality within universities.},
  language  = {en}
}
@inproceedings{OPUS4-3077,
  title     = {Dortmund International Research Conference 2019 : Conference Proceedings},
  editor    = {Wolff, Carsten and Reimann, Christian},
  publisher = {Fachhochschule Dormund},
  address   = {Dortmund},
  isbn      = {978-3-00-063847-3},
  pages     = {131},
  year      = {2019},
  language  = {en}
}
@incollection{Marburger2019,
  author    = {Marburger, Marcel Ren{\´e}},
  title     = {The art of resistance},
  series = {Design (\&) activism: perspectives on design as activism and activism as design},
  publisher = {Mimesis International},
  address   = {Sesto San Giovanni},
  pages     = {205 -- 210},
  year      = {2019},
  language  = {en}
}
@book{J{\"u}nemann2019,
  author    = {J{\"u}nemann, Kai},
  title     = {Will feel eyes on},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  isbn      = {978-3-948440-03-9},
  pages     = {128},
  year      = {2019},
  language  = {en}
}
@article{BongertGellerPennekampetal.2019,
  author    = {Bongert, Markus and Geller, Marius and Pennekamp, Werner and Volkmar, Nicolas},
  title     = {Simulation of personalised haemodynamics by various mounting positions of a prosthetic valve using computational fluid dynamics},
  series = {Biomedical engineering/Biomedizinische Technik},
  volume    = {64 (2019)},
  number    = {2},
  issn      = {1862-278X},
  pages     = {147 -- 156},
  year      = {2019},
  language  = {en}
}
@incollection{WolffLippmannJahn2019,
  author    = {Wolff, Carsten and Lippmann, Torben and Jahn, Uwe},
  title     = {Holistic systems engineering methodology for intelligent energy systems},
  series = {Dependable IoT for human and industry : modeling, architecting, implementation},
  publisher = {River Publishers},
  address   = {Gistrup; Delft},
  pages     = {331 -- 350},
  year      = {2019},
  language  = {en}
}
@incollection{PelkaNensaFriedrich2019,
  author    = {Pelka, Obioma and Nensa, Felix and Friedrich, Christoph M.},
  title     = {Optimizing body region classification with deep convolutional activation features},
  series = {Computer Vision - ECCV 2018 workshops : Munich, Germany, September 8-14, 2018, Proceedings, Part IV},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {699 -- 704},
  year      = {2019},
  language  = {en}
}
@misc{Rosenm{\"u}ller2019,
  author    = {Rosenm{\"u}ller, Stefanie},
  title     = {Book reviews: Working ethically in child protection},
  series = {Social Work Education : the international journal},
  volume    = {38 (2019)},
  number    = {3},
  pages     = {422 -- 426},
  year      = {2019},
  language  = {en}
}
@book{OPUS4-2864,
  title     = {Two cities - Tehran/Dortmund},
  editor    = {Winde, J{\"o}rg},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  pages     = {271},
  year      = {2019},
  language  = {en}
}
@incollection{Marburger2019,
  author    = {Marburger, Marcel Ren{\´e}},
  title     = {The art of resistance},
  series = {Design \& activism : perspectives on design as activism and activism as design},
  publisher = {Mimesis International},
  pages     = {205 -- 210},
  year      = {2019},
  language  = {en}
}
@incollection{BehrenMinsterMagdolenetal.2018,
  author    = {Behren, Sascha and Minster, Clotilde and Magdolen, Miriam and Chlond, Bastian and Hunecke, Marcel and Vortisch, Peter},
  title     = {Bringing travel behavior and attitudes together},
  series = {TRB Annual Meeting 2018 : compendium of papers : January 7-11, 2018, Washington, DC},
  publisher = {TRB, Transportation Research Board of the National Academies},
  address   = {Washington, DC},
  year      = {2018},
  language  = {en}
}
@incollection{BerezhnaWolff2018,
  author    = {Berezhna, Anastasiia and Wolff, Carsten},
  title     = {Key success factors in IT project management},
  series = {Dortmund International Research Conference 2018 : Conference proceedings - 29-30 June 2018},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  pages     = {112 -- 118},
  year      = {2018},
  language  = {en}
}
@misc{Boecker2018,
  author    = {Boecker, Michael},
  title     = {Book reviews: Organisations \& management in social work : everyday action for change},
  series = {Social Work Education : the international journal},
  volume    = {37 (2018)},
  number    = {7},
  pages     = {938 -- 939},
  year      = {2018},
  language  = {en}
}
@incollection{AnjumWolff2018,
  author    = {Anjum, Syeda and Wolff, Carsten},
  title     = {Quality management and standards compliance for agile development of automotive software},
  series = {Dortmund International Research Conference 2018 : Conference proceedings - 29-30 June 2018},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  pages     = {190 -- 193},
  year      = {2018},
  language  = {en}
}
@book{OPUS4-2521,
  title     = {Requirements engineering: foundation for software quality},
  editor    = {Kamsties, Erik and Horkoff, Jennifer and Dalpiaz, Fabiano},
  publisher = {Springer International Publishing},
  address   = {Cham},
  isbn      = {978-3-319-77242-4},
  pages     = {XVII, 369},
  year      = {2018},
  language  = {en}
}
@book{OPUS4-2017,
  title     = {Two cities - Tehran/Dortmund},
  editor    = {Winde, J{\"o}rg},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  pages     = {279},
  year      = {2018},
  language  = {en}
}
@article{GablerKunglBovenschenetal.2018,
  author    = {Gabler, Sandra and Kungl, Melanie and Bovenschen, Ina and Lang, Katrin and Zimmermann, Ina and Nowacki, Katja and Kliewer-Neumann, Josephine and Spangler, Gottfried},
  title     = {Predictors of foster parents' stress and associations to sensitivity in the first year after placement},
  series = {Child Abuse \& Neglect : the international journal},
  volume    = {53 (2018)},
  number    = {79},
  issn      = {0145-2134},
  pages     = {325 -- 338},
  year      = {2018},
  language  = {en}
}
@article{GehronZirbesBongertetal.2018,
  author    = {Gehron, Johannes and Zirbes, Julian and Bongert, Markus and Sch{\"a}fer, Stefan and Fiebich, Martin and Krombach, Gabriele and B{\"o}ning, Andreas and Grieshaber, Philippe},
  title     = {Development and validation of a life-sized mock circulatory loop of the human circulation for fluid-mechanical studies},
  series = {ASAIO Journal},
  volume    = {2018},
  issn      = {1058-2916},
  year      = {2018},
  language  = {en}
}
@incollection{GeismannH{\"o}ttgerKrawczyketal.2018,
  author    = {Geismann, Johannes and H{\"o}ttger, Robert and Krawczyk, Lukas and Pohlmann, Uwe and Schmelter, David},
  title     = {Automated synthesis of a real-time scheduling for cyber-physical multi-core systems},
  series = {Model-Driven Engineering and Software Development : 5th International Conference, MODELSWARD 2017, Porto, Portugal, February 19-21, 2017, Revised Selected Papers},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {72 -- 93},
  year      = {2018},
  language  = {en}
}
@incollection{G{\"o}ssner2018,
  author    = {G{\"o}ssner, Stefan},
  title     = {Fundamentals for web-based analysis and simulation of planar mechanisms},
  series = {EuCoMeS 2018 : Proceedings of the 7th European Conference on Mechanism Science},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {215 -- 222},
  year      = {2018},
  language  = {en}
}