@phdthesis{Koers2024,
  type      = {Master Thesis},
  author    = {Koers, Lars},
  title     = {Setup of test environments based on a Xilinx Zynq SoC for measuring the leakage current and for radiation qualifcation of SRAM based FPGAs},
  doi       = {10.26205/opus-3803},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-38039},
  pages     = {136},
  year      = {2024},
  abstract  = {This thesis discusses the development of test environments using Xilinx Zynq System on Chip (SoC) for measuring leakage currents and radiation qualification of Static Random Access Memory (SRAM) based Field Programmable Gate Arrays (FPGAs) at European Organisation for Nuclear Research (CERN). The effects of radiation on electronic components are explained, followed by an introduction to the FPGAs used. The GateMate FPGAs leakage current is measured in its application area with respect to temperature and core voltages. A comparable testing environment is used from the tester to the tested device, as it will later be used at CERN. The GateMate is being prepared in this setup for the finalization of radiation qualification at CERN, to be transferred later. For this purpose, the basic tests are explained and the outstanding tests are then carried out. The Lattice iCE40 UltraLite FPGA is used in an initial application test to determine its suitability for further radiation qualification tests at CERN. The analysis and presentation of the test results are followed by a summary and outlook.},
  language  = {en}
}
@phdthesis{M{\"u}ller-Baumgart2024,
  type      = {Master Thesis},
  author    = {M{\"u}ller-Baumgart, Ulf},
  title     = {Creation of general representation of a local power grid as a basis for an embedding of electrical devices},
  doi       = {10.26205/opus-3795},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37955},
  pages     = {96},
  year      = {2024},
  language  = {en}
}
@phdthesis{Alaee2024,
  type      = {Master Thesis},
  author    = {Alaee, Ladan},
  title     = {Design and Implementation of a Mixed-Signal Processing Chain for the Optical Determination of Rotation Angles},
  doi       = {10.26205/opus-3793},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37932},
  pages     = {264},
  year      = {2024},
  abstract  = {The aim of this master thesis is the design and implementation of mixed-signal processing chain for the optical determination of rotation angles by means of four sensors implemented as photodiodes with integrated polarization filters and a high-precision CORDIC hardware design implemented on an FPGA in Verilog. Furthermore, a light source and a polarizer are integrated in the measurement setup which is configured using an QT application.},
  language  = {en}
}
@phdthesis{Garc{\´i}a Rodr{\´i}guez2023,
  type      = {Master Thesis},
  author    = {Garc{\´i}a Rodr{\´i}guez, Saul},
  title     = {Design and FPGA implementation of a highly resource-efficient AES-256 encryption and decryption engine},
  doi       = {10.26205/opus-3747},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37471},
  pages     = {263},
  year      = {2023},
  abstract  = {Growing demand for security in a wide range of fields gives raise to research for more efficient and modern methods. Additionally, the increase of systems that are deployed on hardware requires security to be embedded in small area to protect intellectual property, hardware, and integrity and confidentially of sensible data. Therefore, in this work a design and FPGA implementation of a highly resource-efficient AES-256 encryption and decryption engine is presented, as well as its comparison with state-of-the-art designs. The design shows a reduction in the resources used due to its architecture to reuse hardware throughout all the processing. The design is implemented on a Xilinx Artix-7 FPGA.},
  language  = {en}
}
@techreport{Vormann2023,
  type      = {Working Paper},
  author    = {Vormann, Claus},
  title     = {Say what you pay? Pay Information Disclosure in German Job Postings},
  doi       = {10.26205/opus-3740},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37407},
  pages     = {13},
  year      = {2023},
  abstract  = {Purpose - Pay transparency is a promising topic both for research and practice. In particular, the new European directive on compensation transparency will increase its importance. However, research is still relatively sparse compared to other areas of HRM. In particular, state-of-the-art and use of pay information disclosure in job postings is neglected. This paper aims to shed light on this HRM topic. Methodology - The paper summarizes the findings of a preliminary study conducted among German companies researching the proportion of firms offering compensation information in job postings and digging into the reasons behind it. Findings - Only 17 \% of the participating companies disclose meaningful information about compensation in their job postings. Doing so mainly depends on the company's attitude towards pay transparency. The age of the company has a minor negative influence, i.e.~older companies are less prone to disclose salary information. Industry, size, and existing overall pay transparency in the company do not determine if pay information is disclosed in job postings. Research limitations - The main limitation of this survey is its small size of 88 participants and the snowball sampling approach employed. This limits its representativeness and calls for follow-up studies involving more companies and a wider variation of positions included. Practical implications - While the EU directive will make it obligatory to communicate about pay before the first interview, some companies do it already. The study helps HR departments that think about changing their practice before it becomes compulsory to better judge the current standards.},
  language  = {en}
}
@inproceedings{OPUS4-3738,
  title     = {International Research Conference 2017},
  editor    = {Wolff, Carsten and Reimann, Christian},
  isbn      = {978-3-00-058090-1},
  doi       = {10.26205/opus-3738},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37389},
  pages     = {208},
  year      = {2017},
  abstract  = {Proceedings der IRC 2017},
  language  = {en}
}
@inproceedings{OPUS4-3737,
  title     = {International Research Conference 2016},
  editor    = {Reusch, Peter and Wolff, Carsten},
  isbn      = {978-3-00-055144-4},
  doi       = {10.26205/opus-3737},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37376},
  pages     = {228},
  year      = {2016},
  abstract  = {Proceedings der IRC 2016},
  language  = {en}
}
@inproceedings{OPUS4-3736,
  title     = {International Research Conference 2015},
  editor    = {Reusch, Peter and Wolff, Carsten},
  isbn      = {978-3-00-051908-6},
  doi       = {10.26205/opus-3736},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37366},
  pages     = {173},
  year      = {2015},
  abstract  = {Proceedings der IRC 2015},
  language  = {en}
}
@phdthesis{Sarangi2023,
  type      = {Master Thesis},
  author    = {Sarangi, Jitikantha},
  title     = {Digital Calibration, Closed Loop Regulation and Implementation of Digital Debugging Features for the Delay Asymmetry Compensation Logic of a 3D Polarization Camera Based on Time-of-Flight Principle},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  doi       = {10.26205/opus-3732},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-37323},
  pages     = {107},
  year      = {2023},
  abstract  = {The work presented in this thesis deals with the distance measurement aspect of a 3D Polarization ToF camera for automotive applications that uses a Time-to-Digital Converter (TDC) to measure the time interval between the emission of light from a source and its reception. Based on the measurement of the time interval, distance can be calculated by applying the equation of motion. In application, achieving an exact distance measurement is quite strenuous because the operating conditions of the design are susceptible to change due to environmental factors. Therefore, to achieve accuracy in distance measurement, the time interval between the emission and reception of light must be measured precisely. For this purpose, a delay asymmetry compensation logic is developed. This thesis elaborates the addition of debugging features, redesign of some components, digital calibration approach and the entire testbench environment of the delay asymmetry compensation logic. It also sheds light on the implementation of the designed logic for its successful realisation in real hardware. Lastly, it concludes by narrating future prospects and further scopes of development.},
  language  = {en}
}
@phdthesis{Jung2023,
  type      = {Master Thesis},
  author    = {Jung, Richard},
  title     = {Radiation Qualification of the Cologne Chip GateMate A1 FPGA},
  doi       = {10.26205/opus-3364},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-33643},
  pages     = {118},
  year      = {2023},
  abstract  = {In this thesis, the radiation sensitivity of the novel Cologne Chip GateMate A1 field-programmable gate array (FPGA) is evaluated. An initial introduction of radiation mechanisms and their effects on electronics is given, followed by a brief overview of radiation test standards. The common elements present in FPGAs are discussed, which is followed by details of the GateMate FPGA device and a description of the software design flow. Afterwards, the development of a purpose-built printed circuit board (PCB) for radiation tests with the GateMate FPGA is detailed. Four components of the GateMate have been tested during three radiation campaigns, as well as a benchmark circuit to compare the radiation performance of the GateMate with other FPGAs tested at the European Organization for Nuclear Research (CERN). The test architecture consists of the device under test (DUT) FPGA and a TESTER FPGA whose task is to provide inputs to the DUT and record its response. The DUT and TESTER designs developed for all tests are discussed in detail. Finally, the results obtained during the irradiation campaigns are presented, showing that the GateMate FPGA performs similarly to other FPGAs using the same process technology. Only the benchmark test was not finalized, as implementation problems prevented its completion in the given time frame. The thesis concludes with a comprehensive summary and outlook.},
  language  = {en}
}
@unpublished{LattnerGellerKluck2023,
  author    = {Lattner, Yannick and Geller, Marius and Kluck, Norbert},
  title     = {Efficiency Approximation of Centrifugal Compressors in the Cordier Diagram},
  doi       = {10.26205/opus-3366},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-33661},
  pages     = {12},
  year      = {2023},
  abstract  = {We present a simulation data-based efficiency approximation for radial turbocompressors, which is implemented in the well-known Cordier diagram. A sophisticated CAE workflow is used to calculate the operational characteristics of 50 machine designs with 50 impeller geometry variations each. A Kriging-based surrogate model is trained to approximate the efficiency of any machine designs' best geometry design. The models are implemented into a machine design workflow. As a result, duty-specific Cordier lines are introduced. They are automatically generated for a set of machine design parameters. The efficiency of the designs along the duty-specific Cordier lines is approximated. Using optimization techniques, an optimal compressor design for the given duty on every specific Cordier line may be identified. This highly increases the amount of information available in the early design stages for radial turbocompressors.},
  language  = {en}
}
@article{LattnerGeller2023,
  author    = {Lattner, Yannick and Geller, Marius},
  title     = {Radial Turbocompressor Chord Length Approximation for the Reynold's Number Calculation},
  doi       = {10.26205/opus-3335},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-33351},
  year      = {2023},
  abstract  = {We present an approximation model for the chord length of radial turbocompressors. The model enables the calculation of a compressor's chord Reynold's number during the machine design process. The chord Reynold's number is shown to be the most accurate representation of the fluid dynamic properties inside the radial turbocompressor's impeller. It — however — requires the computation of the chord length, which is only available after defining the final impeller geometry. The method presenting in this paper only employs the compressors principal dimensions to approximate the chord length. The chord is modelled using a B{\´e}zier spline and quarter ellipse. This enables the earlier use of the chord Reynold's number during the machine design process of radial turbocompressors.},
  language  = {en}
}
@phdthesis{Werk2021,
  author    = {Werk, Katharina},
  title     = {Risk-taking behavior as a hidden factor for sustainable business models' performance of European banks},
  pages     = {xxiv, 299},
  year      = {2021},
  language  = {en}
}
@article{Gr{\"a}ßerTeschSchmittetal.2021,
  author    = {Gr{\"a}ßer, Felix and Tesch, Falko and Schmitt, Jochen and Abraham, Susanne and Malberg, Hagen and Zaunseder, Sebastian},
  title     = {A pharmaceutical therapy recommender system enabling shared decision-making},
  series = {User Modeling and User-Adapted Interaction},
  issn      = {0924-1868},
  year      = {2021},
  language  = {en}
}
@article{BeharLiuKotzenetal.2020,
  author    = {Behar, Joachim A. and Liu, Chengyu and Kotzen, Kevin and Tsutsui, Kenta and Corino, Valentina D. A. and Singh, Janmajay and Pimentel, Marco A. F. and Warrick, Philip and Zaunseder, Sebastian and Andreotti, Fernando},
  title     = {Remote health diagnosis and monitoring in the time of COVID-19},
  series = {Physiological Measurement},
  volume    = {41 (2020)},
  number    = {10},
  issn      = {1361-6579},
  year      = {2020},
  language  = {en}
}
@article{GrahamClarkeWuetal.2021,
  author    = {Graham, Sarah E. and Clarke, Shoa L. and Wu, Kuan-Han H. and Kanoni, Stavroula and Arendt, Marina},
  title     = {The power of genetic diversity in genome-wide association studies of lipids},
  series = {Nature},
  volume    = {600 (2021)},
  issn      = {1476-4687},
  pages     = {675 -- 679},
  year      = {2021},
  language  = {en}
}
@article{WichertRabsteinStangetal.2020,
  author    = {Wichert, Katharina and Rabstein, Sylvia and Stang, Andreas and Erbel, Raimund and Eisele, Lewin and Arendt, Marina and Dragano, Nico and Hoffmann, Wolfgang and Lerch, Markus M. and Roskoden, Frederick Charles and Schmidt, Carsten Oliver and V{\"o}lzke, Henry and J{\"o}ckel, Karl-Heinz and Br{\"u}ning, Thomas and Behrens, Thomas},
  title     = {Associations between shift work and risk of colorectal cancer in two German cohort studies},
  series = {Chronobiology International : the journal of biological and medical rhythm research},
  volume    = {37 (2020)},
  number    = {8},
  issn      = {1525-6073},
  pages     = {1235 -- 1243},
  year      = {2020},
  language  = {en}
}
@article{KuhntBecker-EmdenSchadeetal.2021,
  author    = {Kuhnt, Sonja and Becker-Emden, Eva-Christina and Schade, Tim and Eden, Wolfgang and Middendorf, Bernhard},
  title     = {Use of optimal mixture-process designs and response-surface models to study properties of calcium silicate units},
  series = {Quality and Reliability Engineering International},
  volume    = {37 (2021)},
  number    = {2},
  issn      = {0748-8017},
  pages     = {391 -- 408},
  year      = {2021},
  language  = {en}
}
@incollection{TillmannBaumannBrinkhoffetal.2021,
  author    = {Tillmann, W. and Baumann, I. and Brinkhoff, A. and Kuhnt, Sonja and Becker-Emden, Eva-Christina and Kalka, A.},
  title     = {Effect of the spray parameters on the particle behavior and the coating properties during ID warm spraying of fine WC-12Co powders (-10 + 2 μm)},
  series = {Thermal Spray 2021 : proceedings from the international thermal spray conference},
  publisher = {ASM},
  address   = {Kinsman Road, OH},
  pages     = {283 -- 289},
  year      = {2021},
  language  = {en}
}
@book{OPUS4-3268,
  title     = {The history of graphic design},
  editor    = {M{\"u}ller, Jens and Wiedemann, Julius},
  publisher = {Taschen},
  address   = {K{\"o}ln},
  isbn      = {978-3-8365-8806-5},
  pages     = {511},
  year      = {2022},
  language  = {en}
}
@incollection{Seco de HerreraIonescuM{\"u}lleretal.2022,
  author    = {Seco de Herrera, Alba G. and Ionescu, Bogdan and M{\"u}ller, Henning and P{\´e}teri, Renaud and Ben Abacha, Asma and Friedrich, Christoph M. and R{\"u}ckert, Johannes and Bloch, Louise and Br{\"u}ngel, Raphael and Idrissi-Yaghir, Ahmad and Sch{\"a}fer, Henning and Kozlovski, Serge and Dicente Cid, Yashin and Kovalev, Vassili and Chamberlain, Jon and Clark, Adrian and Campello, Antonio and Schindler, Hugo and Deshayes, J{\´e}rome and Popescu, Adrian and Ştefan, Liviu-Daniel and Constantin, Mihai Gabriel and Dogariu, Mihai},
  title     = {ImageCLEF 2022: multimedia retrieval in medical, nature, fusion and internet applications},
  series = {Advances in Information Retrieval: 44th European Conference on IR Research, ECIR 2022, Stavanger, Norway, April 10-14, 2022, Proceedings, Part II},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {382 -- 389},
  year      = {2022},
  language  = {en}
}
@article{KremerKhaniAppeletal.2022,
  author    = {Kremer, Robert and Khani, Somayeh and Appel, Tamara and Palkowski, Heinz and Foadian, Farzad},
  title     = {Selective laser melting of CuSn10: simulation of mechanical properties, microstructure, and residual stresses},
  series = {Materials},
  volume    = {15 (2022)},
  number    = {11},
  issn      = {1996-1944},
  pages     = {1 -- 13},
  year      = {2022},
  language  = {en}
}
@article{BrumannKukuk2022,
  author    = {Brumann, Christopher and Kukuk, Markus},
  title     = {Evolution based single camera resectioning based on distance maps of a known geometry for Squash sports},
  series = {IEEE Access},
  issn      = {2169-3536},
  pages     = {58136 -- 58150},
  year      = {2022},
  language  = {en}
}
@phdthesis{M{\"u}ller-Baumgart2022,
  type      = {Bachelor Thesis},
  author    = {M{\"u}ller-Baumgart, Antonia},
  title     = {Estimation of fuel consumption of pleasure vessels based on environmental data models},
  doi       = {10.26205/opus-3198},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-31988},
  pages     = {130},
  year      = {2022},
  language  = {en}
}
@article{KotthausSch{\"a}ferStankovicetal.2021,
  author    = {Kotthaus, Jochem and Sch{\"a}fer, Matthias and Stankovic, Nikola and Weitzel, Gerrit},
  title     = {How soccer becomes politics},
  series = {International journal of sport communication},
  volume    = {14 (2021)},
  number    = {3},
  issn      = {1936-3915},
  pages     = {428 -- 447},
  year      = {2021},
  language  = {en}
}
@incollection{KotthausKrampePionteketal.2021,
  author    = {Kotthaus, Jochem and Krampe, Karsten and Piontek, Andrea and Weitzel, Gerrit},
  title     = {How to make the cut in academia},
  series = {Researchers at risk : precarity, jeopardy and uncertainty in academia},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {131 -- 146},
  year      = {2021},
  language  = {en}
}
@article{Guias2022,
  author    = {Guias, Flavius},
  title     = {On efficacy and effectiveness of vaccines},
  series = {Spora : a journal of biomathematics},
  volume    = {8 (2022)},
  issn      = {2473-5493},
  pages     = {56 -- 60},
  year      = {2022},
  language  = {en}
}
@article{Fischer2021,
  author    = {Fischer, Ute},
  title     = {Rolling back or liberation?},
  series = {European Green Perspectives on Basic Income},
  volume    = {2021},
  number    = {2},
  pages     = {25 -- 29},
  year      = {2021},
  language  = {en}
}
@article{Guias2020,
  author    = {Guias, Flavius},
  title     = {Effects of the reproduction number in a SEIIRD model describing the time evolution of COVID-19 at country level},
  series = {WSEAS Transactions on Computer Research},
  volume    = {19 (2020)},
  issn      = {1991-8755},
  pages     = {292 -- 297},
  year      = {2020},
  language  = {en}
}
@incollection{HeßR{\"o}hrig2020,
  author    = {Heß, Daniel and R{\"o}hrig, Christof},
  title     = {Robust and precise localization of mobile robots using EFIR estimation for fusing odometry with position measurements},
  series = {52nd International Symposium on Robotics : 9-10 December 2020, Online-Event, Germany},
  publisher = {VDE Verlag},
  address   = {Berlin ; Offenbach},
  pages     = {37 -- 43},
  year      = {2020},
  language  = {en}
}
@phdthesis{Shi2022,
  type      = {Master Thesis},
  author    = {Shi, Yanchen},
  title     = {Power Simulation of a MIPS microAptiv UP Core implemented as a virtual ASIC prototype in a 65nm CMOS technology},
  doi       = {10.26205/opus-3217},
  url       = {https://nbn-resolving.org/urn:nbn:de:hbz:dm13-32171},
  pages     = {93},
  year      = {2022},
  abstract  = {This thesis presents a power simulation of a MIPS MicroAptiv UP Core implemented as a virtual ASIC prototype using Taiwan Semiconductor Manufacturing Company(TSMC) 65 nm CMOS technology. Based on the MIPS instruction set program data is generated and introduced in the simulation by means of initialization files. Before the simulation, technology specific SRAM modules are integrated into theMIPS core. Two different programs are used for power characterization. The first program performs frequent memory accesses by means of load/store word instructions, while the second program is a loop which operates on registers only and mainly increments addresses. The simulation is based on a virtual prototype which is generated by synthesis and place \& route including post-layout parasitic extractions. The stimuli for the power extraction is generated via gate-level simulation and forwarded to the power calculation engine. The effect of X-propagation on gate-level simulations is avoided by modifying the address-related statements in the execution data path module, which use another form of 2 to 1 multiplexer, setting the output to zero for all input signals even with an initial value of 'x' without changing the functionality. Finally, the consumed power is provided by reports generated by the power simulation engine. The memory-centric program consumes 35.39mW of internal power using instructions, which is 0.73mW less than the internal power of the register-centric program, and the overall average power is also lower by almost 0.7mW.},
  language  = {en}
}
@phdthesis{Richter2021,
  author    = {Richter, Nadine},
  title     = {Being mindful, living sustainable: relationships between mindfulness, well-being and pro-environmental behavior},
  pages     = {V, 182},
  year      = {2021},
  language  = {en}
}
@article{BrumannKukukReinsberger2021,
  author    = {Brumann, Christopher and Kukuk, Markus and Reinsberger, Claus},
  title     = {Evaluation of open-source and pre-trained deep convolutional neural networks suitable for player detection and motion analysis in squash},
  series = {Sensors},
  volume    = {2021},
  number    = {21(13)},
  issn      = {1424-8220},
  pages     = {1 -- 25},
  year      = {2021},
  language  = {en}
}
@incollection{CopeiEickhoffMaliketal.2022,
  author    = {Copei, Sebastian and Eickhoff, Christoph and Malik, Adam and Nolte, Natascha and Norbisrath, Ulrich and Sorgalla, Jonas and Weber, Jens and Z{\"u}ndorf, Albert},
  title     = {From monolithic models to agile micromodels},
  series = {Proceedings of the 10th International Conference on Model-Driven Engineering and Software Development},
  publisher = {SciTePress},
  address   = {Set{\´u}bal},
  pages     = {227 -- 233},
  year      = {2022},
  language  = {en}
}
@article{Gr{\"a}ßerTeschSchmittetal.2021,
  author    = {Gr{\"a}ßer, Felix and Tesch, Falko and Schmitt, Jochen and Abraham, Susanne and Malberg, Hagen and Zaunseder, Sebastian},
  title     = {A pharmaceutical therapy recommender system enabling shared decision-making},
  series = {User Modeling and User-Adapted Interaction},
  volume    = {2021},
  issn      = {0924-1868},
  year      = {2021},
  language  = {en}
}
@article{Boecker2021,
  author    = {Boecker, Michael},
  title     = {The social and cultural construction of disability in the Global South},
  series = {Behinderung und Internationale Entwicklung = Disability and International Development},
  volume    = {32 (2021)},
  number    = {1},
  issn      = {2191-6888},
  pages     = {18 -- 23},
  year      = {2021},
  language  = {en}
}
@article{BoeckerRanigaMthembu2021,
  author    = {Boecker, Michael and Raniga, Tanusha and Mthembu, Maud},
  title     = {Single mothers in South Africa and Germany in formal employment contexts},
  series = {Open Gender Journal},
  volume    = {5 (2021)},
  number    = {1},
  issn      = {2512-5192},
  year      = {2021},
  language  = {en}
}
@article{PielmusM{\"u}hlstefBreschetal.2021,
  author    = {Pielmus, Alexandru-Gabriel and M{\"u}hlstef, Jens and Bresch, Erik and Glos, Martin and Jungen, Christiane and Mieke, Stefan and Orglmeister, Reinhold and Schulze, Andreas and Stender, Birgit and Voigt, Verena and Zaunseder, Sebastian},
  title     = {Surrogate based continuous noninvasive blood pressure measurement},
  series = {Biomedical Engineering},
  volume    = {66 (2021)},
  number    = {3},
  issn      = {0013-5585},
  pages     = {231 -- 246},
  year      = {2021},
  language  = {en}
}
@article{WoyczykFleischhauerZaunseder2021,
  author    = {Woyczyk, Alexander and Fleischhauer, Vincent and Zaunseder, Sebastian},
  title     = {Adaptive Gaussian mixture model driven level set segmentation for remote pulse rate detection},
  series = {IEEE Journal of Biomedical and Health Informatics},
  volume    = {25 (2021)},
  number    = {5},
  issn      = {2168-2194},
  pages     = {1361 -- 1372},
  year      = {2021},
  language  = {en}
}
@book{OPUS4-3161,
  title     = {Two cities - Tehran/Dortmund},
  editor    = {Winde, J{\"o}rg},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  pages     = {123},
  year      = {2021},
  language  = {en}
}
@incollection{Br{\"u}ckner2020,
  author    = {Br{\"u}ckner, Ulrike},
  title     = {The role of education for good design},
  series = {Design and arts for future now},
  publisher = {Esad College of Art and Design},
  address   = {Matosinhos},
  pages     = {68 -- 87},
  year      = {2020},
  language  = {en}
}
@incollection{M{\"u}ller2022,
  author    = {M{\"u}ller, Jens},
  title     = {A contribution to the history of graphic design},
  series = {F{\´e}lix Beltr{\´a}n - visual intelligence: graphic design in a social sense},
  publisher = {Optik Books},
  address   = {Dortmund},
  pages     = {8 -- 9},
  year      = {2022},
  language  = {en}
}
@incollection{Marburger2019,
  author    = {Marburger, Marcel Ren{\´e}},
  title     = {The art of resistance},
  series = {Design (\&) activism: perspectives on design as activism and activism as design},
  publisher = {Mimesis International},
  address   = {Sesto San Giovanni},
  pages     = {205 -- 210},
  year      = {2019},
  language  = {en}
}
@article{Scorzin2021,
  author    = {Scorzin, Pamela C.},
  title     = {On the contemporary scenopolitics},
  series = {Art Style : Art \& Culture International Magazine},
  volume    = {8 (2021)},
  number    = {1},
  issn      = {2596-1802},
  pages     = {71 -- 85},
  year      = {2021},
  language  = {en}
}
@article{KochPlattfautKregel2021,
  author    = {Koch, Julian and Plattfaut, Ralf and Kregel, Ingo},
  title     = {Looking for talent in times of crisis},
  series = {International journal of information management data insights},
  volume    = {1 (2021)},
  number    = {2},
  issn      = {2667-0968},
  pages     = {12},
  year      = {2021},
  language  = {en}
}
@article{KregelKochPlattfaut2021,
  author    = {Kregel, Ingo and Koch, Julian and Plattfaut, Ralf},
  title     = {Beyond the hype},
  series = {Journal of organizational computing and electronic commerce},
  issn      = {1532-7744},
  year      = {2021},
  language  = {en}
}
@book{OPUS4-3122,
  title     = {Dortmund International Research Conference 2021 : conference proceedings},
  editor    = {Olivos, Mariella and Reimann, Christian and Weyers, Stephan and Wolff, Carsten},
  publisher = {Fachhochschule Dortmund, IDiAL - Institute for the Digital Transformation of Application and Living Domains},
  address   = {Dortmun},
  isbn      = {978-3-948228-02-6},
  pages     = {311},
  year      = {2021},
  language  = {en}
}
@book{OPUS4-3120,
  title     = {100 poster battle 2020-2021},
  editor    = {Harmsen, Lars},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  isbn      = {978-3-948440-29-9},
  pages     = {243},
  year      = {2021},
  language  = {en}
}
@phdthesis{Deitelhoff2020,
  author    = {Deitelhoff, Fabian},
  title     = {Developing eye tracking methods for detecting source code comprehension strategies},
  pages     = {XII, 236},
  year      = {2020},
  language  = {en}
}
@inproceedings{OPUS4-3077,
  title     = {Dortmund International Research Conference 2019 : Conference Proceedings},
  editor    = {Wolff, Carsten and Reimann, Christian},
  publisher = {Fachhochschule Dormund},
  address   = {Dortmund},
  isbn      = {978-3-00-063847-3},
  pages     = {131},
  year      = {2019},
  language  = {en}
}
@inproceedings{OPUS4-3078,
  title     = {Dortmund International Research Conference 2020 : Conference Proceedings},
  editor    = {Wolff, Carsten and Reimann, Christian},
  publisher = {Fachhochschule Dormund},
  address   = {Dortmund},
  isbn      = {978-3-948228-01-9},
  pages     = {288},
  year      = {2020},
  language  = {en}
}
@phdthesis{Spicher2020,
  author    = {Spicher, Nicolai},
  title     = {Time-frequency analysis of optical and electrical cardiac signals with applications in ultra-high-field MRI},
  pages     = {177},
  year      = {2020},
  language  = {en}
}
@article{Scorzin2021,
  author    = {Scorzin, Pamela C.},
  title     = {As real as Rihanna? - the curious case of Miquela Sousa},
  series = {Slanted},
  volume    = {2021},
  number    = {37},
  issn      = {1867-6510},
  pages     = {100 -- 105},
  year      = {2021},
  language  = {en}
}
@article{MechWohllebenGhanemetal.2020,
  author    = {Mech, Agnieszka and Wohlleben, Wendel and Ghanem, Antoine and Hodoroaba, Vasile-Dan and Weigel, Stefan and Babick, Frank and Br{\"u}ngel, Raphael and Friedrich, Christoph M. and Rasmussen, Kirsten and Rauscher, Hubert},
  title     = {Nano or not nano? A structured approach for identifying nanomaterials according to the European Commission's definition},
  series = {Small},
  volume    = {16 (2020)},
  number    = {36},
  issn      = {1613-6810},
  year      = {2020},
  language  = {en}
}
@article{Guias2020,
  author    = {Guias, Flavius},
  title     = {Numerical simulation of a modified SIR model fitting statistical data for COVID-19},
  series = {WSEAS Transactions on Computer Research},
  volume    = {8 (2020)},
  issn      = {1991-8755},
  pages     = {115 -- 125},
  year      = {2020},
  language  = {en}
}
@article{Bakkervan der SpekFriedrich2020,
  author    = {Bakker, Mark K. and van der Spek, Rick A. A. and Friedrich, Christoph M.},
  title     = {Genome-wide association study of intracarnial aneurysms identifies 17 risk loci and genetic overlap with clinical risk factors},
  series = {Nature Genetics},
  volume    = {2020},
  number    = {12},
  issn      = {1061-4036},
  pages     = {1303 -- 1313},
  year      = {2020},
  language  = {en}
}
@article{KoitkaKimQuetal.2020,
  author    = {Koitka, Sven and Kim, Moon S. and Qu, Ming and Fischer, Asja and Friedrich, Christoph M. and Nensa, Felix},
  title     = {Mimicking the radiologists' workflow: estimating pediatric hand bone age with stacked deep neural networks},
  series = {Medical Image Analysis},
  volume    = {64 (2020)},
  issn      = {1361-8415},
  year      = {2020},
  language  = {en}
}
@article{Kotthaus2020,
  author    = {Kotthaus, Jochem},
  title     = {The religious experience of setting off emergency flares?},
  series = {Schutzian Research},
  volume    = {12 (2020)},
  issn      = {2067-0621},
  pages     = {125 -- 154},
  year      = {2020},
  language  = {en}
}
@article{MeyerRichterHartung-Beck2020,
  author    = {Meyer, Andr{\´e} and Richter, Dirk and Hartung-Beck, Viola},
  title     = {The relationship between principal leadership and teacher collaboration: investigant the mediating effect of teachers' collective efficacy},
  series = {Educational management administration \& leadership},
  volume    = {2020},
  issn      = {1741-1440},
  year      = {2020},
  language  = {en}
}
@article{HuneckeGrothWittowsky2020,
  author    = {Hunecke, Marcel and Groth, S{\"o}ren and Wittowsky, Dirk},
  title     = {Young social milieus and multimodality: interrelations of travel behaviours and psychographic characteristics},
  series = {Mobilities},
  volume    = {15 (2020)},
  number    = {3},
  issn      = {1745-0101},
  pages     = {397 -- 415},
  year      = {2020},
  language  = {en}
}
@article{RichterHunecke2020,
  author    = {Richter, Nadine and Hunecke, Marcel},
  title     = {Facets of mindfulness in stages of behavior change toward organic food consumption},
  series = {Mindfulness},
  volume    = {11 (2020)},
  number    = {6},
  issn      = {1868-8527},
  pages     = {1354 -- 1369},
  year      = {2020},
  language  = {en}
}
@article{PelkaFriedrichNensaetal.2020,
  author    = {Pelka, Obioma and Friedrich, Christoph M. and Nensa, Felix and M{\"o}nninghoff, Christoph and Bloch, Louise and J{\"o}ckel, Karl-Heinz and Schramm, Sara and Sanchez Hoffmann, Sarah and Winkler, Angela and Weimar, Christian and Jokisch, Martha},
  title     = {Sociodemographic data and APOE-ε4 augmentation for MRI-based detection of amnestic mild cognitive impairment using deep learning systems},
  series = {PLoS ONE},
  volume    = {2020},
  issn      = {1932-6203},
  year      = {2020},
  language  = {en}
}
@incollection{BlochBokettaKeibeletal.2020,
  author    = {Bloch, Louise and Boketta, Adrian and Keibel, Christopher and Mense, Eric and Michailutschenko, Alex and Pelka, Obioma and R{\"u}ckert, Johannes and Willemeit, Leon and Friedrich, Christoph M.},
  title     = {Combination of image and location information for snake species identification using object detection and EfficientNets},
  series = {CLEF 2020: CLEF 2020 working notes : working notes of CLEF 2020 - Conference and Labs of the Evaluation Forum : Thessaloniki, Greece, September 22-25, 202},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  year      = {2020},
  language  = {en}
}
@incollection{BlochFriedrich2021,
  author    = {Bloch, Louise and Friedrich, Christoph},
  title     = {Developing a machine learning workflow to explain black-box models for Alzheimer's disease classification},
  series = {BIOSTEC 2021 : proceedings of the 14th International Joint Conference on Biomedical Engineering Systems and Technologies : online streaming, February 11-13, 2021},
  publisher = {SCITEPRESS - Science and Technology Publications},
  address   = {S{\´e}tubal},
  pages     = {87 -- 99},
  year      = {2021},
  language  = {en}
}
@incollection{BlochFriedrich2021,
  author    = {Bloch, Louise and Friedrich, Christoph},
  title     = {Using Bayesian optimization to effectively tune random forest and XGBoost hyperparameters for early Alzheimer's disease diagnosis},
  series = {Wireless Mobile Communication and Healthcare : 9th EAI International Conference, MobiHealth 2020, Virtual Event, November 19, 2020, Proceedings},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {285 -- 299},
  year      = {2021},
  language  = {en}
}
@article{Scorzin2020,
  author    = {Scorzin, Pamela C.},
  title     = {Orbital art in the age of internet and space flight: from terrestrial to orbital perspectives},
  series = {Art Sytle - Art \& Culture international magazine},
  volume    = {2020},
  number    = {5},
  issn      = {2596-1802},
  pages     = {25 -- 49},
  year      = {2020},
  language  = {en}
}
@article{P{\"o}geDennertKoppeetal.2020,
  author    = {P{\"o}ge, Kathleen and Dennert, Gabriele and Koppe, Uwe and G{\"u}ldenring, Annette and Matthigack, Ev B. and Rommel, Alexander},
  title     = {The health of lesbian, gay, bisexual, transgender and intersex people},
  series = {Journal of Health Monitoring},
  volume    = {2020},
  number    = {5 (S1)},
  issn      = {2511-2708},
  pages     = {1 -- 27},
  year      = {2020},
  language  = {en}
}
@incollection{BlejaWiewelhoveGrossmannetal.2020,
  author    = {Bleja, Jelena and Wiewelhove, Dominik and Grossmann, Uwe and M{\"o}rz, Elisabetta},
  title     = {Collaborative business model structures for wireless ambient assisted living systems},
  series = {IEEE International Symposium on Wireless Systems (IDAACS-SWS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@article{BlejaWiewelhoveKruegeretal.2020,
  author    = {Bleja, Jelena and Wiewelhove, Dominik and Krueger, T. and Grossmann, Uwe},
  title     = {User acceptance and evaluation of ambient assisted living systems},
  series = {Gerontechnology : official journal of the international society for gerontechnology},
  volume    = {19 (2020)},
  issn      = {1569-1101},
  year      = {2020},
  language  = {en}
}
@incollection{R{\"o}hrigHeß2020,
  author    = {R{\"o}hrig, Christof and Heß, Daniel},
  title     = {Mobile manipulation for human-robot collaboration in intralogistics},
  series = {IAENG transactions on engineering sciences : special Issue for the International Association of Engineers conferences 2019},
  publisher = {World Scientific},
  address   = {New Jersey u. a.},
  pages     = {1 -- 20},
  year      = {2020},
  language  = {en}
}
@incollection{SchmelterF{\"u}hnerR{\"o}hrig2020,
  author    = {Schmelter, Steffen and F{\"u}hner, Claus and R{\"o}hrig, Christof},
  title     = {Container filling level estimation using vibration resonance behavior},
  series = {2020 IEEE 5th International Symposium on Smart and Wireless Systems within the Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS-SWS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@incollection{BlejaLangerGrossmannetal.2020,
  author    = {Bleja, Jelena and Langer, Henrike and Grossmann, Uwe and M{\"o}rz, Elisabetta},
  title     = {Ambient assisted living - an integral part of future smart cities},
  series = {IEEE European Technology and Engineering Management Summit (E-TEMS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@incollection{Marburger2019,
  author    = {Marburger, Marcel Ren{\´e}},
  title     = {The art of resistance},
  series = {Design \& activism : perspectives on design as activism and activism as design},
  publisher = {Mimesis International},
  pages     = {205 -- 210},
  year      = {2019},
  language  = {en}
}
@incollection{BlejaLangerGrossmannetal.2020,
  author    = {Bleja, Jelena and Langer, Henrike and Grossmann, Uwe and M{\"o}rz, Elisabetta},
  title     = {Smart cities for everyone},
  series = {2020 IEEE European Technology and Engineering Management Summit (E-TEMS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@article{NeisenSchulte-Mattler2020,
  author    = {Neisen, Martin and Schulte-Mattler, Hermann},
  title     = {CRD V/CRR II: a comprehensive synopsis of the first European step towards implementing Basel IV (part II)},
  series = {Journal of risk management in financial institutions},
  volume    = {13 (2020)},
  number    = {3},
  issn      = {1752-8887},
  pages     = {224 -- 241},
  year      = {2020},
  language  = {en}
}
@article{NeisenSchulte-Mattler2020,
  author    = {Neisen, Martin and Schulte-Mattler, Hermann},
  title     = {CRD V/CRR II: a comprehensive synopsis of the first European step towards implementing Basel IV (part I)},
  series = {Journal of risk management in financial institutions},
  volume    = {13 (2020)},
  number    = {2},
  issn      = {1752-8887},
  pages     = {114 -- 125},
  year      = {2020},
  language  = {en}
}
@article{KregelStemannKochetal.2021,
  author    = {Kregel, Ingo and Stemann, Dietmar and Koch, Julian and Coners, Andr{\´e}},
  title     = {Process mining for Six Sigma: utilising digital traces},
  series = {Computers \& industrial engineering},
  volume    = {62 (2021)},
  number    = {153},
  issn      = {0360-8352},
  year      = {2021},
  language  = {en}
}
@incollection{SorgallaSachwehZ{\"u}ndorf2020,
  author    = {Sorgalla, Jonas and Sachweh, Sabine and Z{\"u}ndorf, Albert},
  title     = {Exploring the microservice development process in small and medium-sized organizations},
  series = {Product-focused software process improvement : 21st International Conference, PROFES 2020, Turin, Italy, November 25-27, 2020, proceedings},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {453 -- 460},
  year      = {2020},
  language  = {en}
}
@incollection{LokeshwaraChandura PoovaiahKolteetal.2020,
  author    = {Lokeshwara, Shankar and Chandura Poovaiah, Naveen Chengappa and Kolte, Shambhavi and Krawczyk, Lukas},
  title     = {Performance effective task scheduling with duplication - PETSD},
  series = {2020 IEEE 5th international symposium on smart and wireless systems within the conferences on intelligent data acquisition and advanced computing systems (IDAACS-SWS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@incollection{BazzalKrawczykGovindarajanetal.2020,
  author    = {Bazzal, Mahmoud and Krawczyk, Lukas and Govindarajan, Ram Prasath and Wolff, Carsten},
  title     = {Timing analysis of car-to-car communication systems using real-time calculus},
  series = {2020 IEEE 5th international symposium on smart and wireless systems within the conferences on intelligent data acquisition and advanced computing systems (IDAACS-SWS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@article{JahnHeßStampaetal.2020,
  author    = {Jahn, Uwe and Heß, Daniel and Stampa, Merlin and Sutorma, Andreas and R{\"o}hrig, Christof and Schulz, Peter and Wolff, Carsten},
  title     = {A taxonomy for mobile robots: types, applications, capabilities, implementations, requirements, and challenges},
  series = {Robotics},
  volume    = {9 (2020)},
  number    = {4},
  issn      = {2218-6581},
  pages     = {109 -- 109},
  year      = {2020},
  language  = {en}
}
@incollection{StampaSutormaJahnetal.2020,
  author    = {Stampa, Merlin and Sutorma, Andreas and Jahn, Uwe and Willich, Felix and Pratzler-Wanczura, Sylvia and Thiem, J{\"o}rg and R{\"o}hrig, Christof and Wolff, Carsten},
  title     = {A scenario for a multi-UAV mapping and surveillance system in emergency response applications},
  series = {2020 IEEE 5th international symposium on smart and wireless systems within the conferences on intelligent data acquisition and advanced computing systems (IDAACS-SWS)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2020},
  language  = {en}
}
@article{BongertW{\"u}stStrauchetal.2020,
  author    = {Bongert, Markus and W{\"u}st, Jan and Strauch, Justus and Buchwald, Dirk},
  title     = {Proof of concept for ozone-based disinfection of heater cooler units},
  series = {Current directions in biomedical engineering},
  volume    = {6 (2020)},
  number    = {3},
  issn      = {2364-5504},
  year      = {2020},
  language  = {en}
}
@misc{OPUS4-2898,
  title     = {Voltaire - Migration},
  series = {Voltaire Magazin},
  number    = {7},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  pages     = {188},
  year      = {2020},
  language  = {en}
}
@book{J{\"u}nemann2019,
  author    = {J{\"u}nemann, Kai},
  title     = {Will feel eyes on},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  isbn      = {978-3-948440-03-9},
  pages     = {128},
  year      = {2019},
  language  = {en}
}
@book{OPUS4-2864,
  title     = {Two cities - Tehran/Dortmund},
  editor    = {Winde, J{\"o}rg},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  pages     = {271},
  year      = {2019},
  language  = {en}
}
@article{WolffKnirrPriebeetal.2018,
  author    = {Wolff, Carsten and Knirr, Matthias and Priebe, Klaus-Peter and Schulz, Peter and Strumberg, J{\"o}rn},
  title     = {A layered software architecture for a flexibel and smart Organic Rankine Cyle (ORC) turbine},
  series = {Information Technology and Control},
  volume    = {47 (2018)},
  number    = {2},
  issn      = {1392-124X},
  pages     = {349 -- 362},
  year      = {2018},
  language  = {en}
}
@incollection{WolffLippmannJahn2019,
  author    = {Wolff, Carsten and Lippmann, Torben and Jahn, Uwe},
  title     = {Holistic systems engineering methodology for intelligent energy systems},
  series = {Dependable IoT for human and industry : modeling, architecting, implementation},
  publisher = {River Publishers},
  address   = {Gistrup; Delft},
  pages     = {331 -- 350},
  year      = {2019},
  language  = {en}
}
@incollection{WolffNuseibah2018,
  author    = {Wolff, Carsten and Nuseibah, Ala},
  title     = {Application enablement providers in the Internet of Things},
  series = {The crossing point of intelligent data acquisition \& advanced computing systems and East \& West scientists : IDAACS-SWS 2018 : proceedings of the 2018 IEEE 4th International Symposium on Wireless Systems within the International Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS-SWS) : September 20-21, 2018, Lviv, Ukraine},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  pages     = {117 -- 124},
  year      = {2018},
  language  = {en}
}
@incollection{WojtokGrimmHirsch2017,
  author    = {Wojtok, Andreas and Grimm, David and Hirsch, Martin},
  title     = {Multi-agent system to the rescue!},
  series = {Dortmund International Research Conference 2017 : Conference proceedings},
  publisher = {Fachhochschule Dortmund},
  address   = {Dortmund},
  year      = {2017},
  language  = {en}
}
@incollection{WolffKnirrPallwitzetal.2017,
  author    = {Wolff, Carsten and Knirr, Matthias and Pallwitz, Tobias and Igci, H{\"u}seyin and Priebe, Klaus-Peter and Schulz, Peter},
  title     = {Software architecture for an ORC turbine},
  series = {Information and Software Technologies : 23rd International Conference, ICIST 2017, Druskininkai, Lithuania, October 12-14, 2017, Proceedings},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {226 -- 237},
  year      = {2017},
  language  = {en}
}
@incollection{WizentyRademacherSorgallaetal.2018,
  author    = {Wizenty, Philip and Rademacher, Florian and Sorgalla, Jonas and Sachweh, Sabine},
  title     = {Design and implementation of a remote care application based on microservice architecture},
  series = {Software Technologies : Applications and Foundations : STAF 2018 Collocated Workshops, Toulouse, France, June 25-29, 2018, Revised Selected Papers},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {549 -- 557},
  year      = {2018},
  language  = {en}
}
@incollection{Tysiak2018,
  author    = {Tysiak, Wolfgang},
  title     = {A deeper insight into the human factor in project risk management},
  series = {7th International Scientific Conference on Project Management in the Baltic Countries "Project Management Development -Practice and Perspectives" : Riga, Latvia, April 19-20, 2018, Conference Proceedings},
  publisher = {University of Latvia},
  address   = {Riga},
  pages     = {157 -- 164},
  year      = {2018},
  language  = {en}
}
@incollection{TrotzekKoitkaFriedrich2018,
  author    = {Trotzek, Marcel and Koitka, Sven and Friedrich, Christoph M.},
  title     = {Early detection of depression based on linguistic metadata augmented classifiers revisited},
  series = {Experimental IR meets multilinguality, multimodality, and interaction : 9th International Conference of the CLEF Association, CLEF 2018, Avignon, France, September 10-14, 2018, proceedings},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {191 -- 202},
  year      = {2018},
  language  = {en}
}
@incollection{TrotzekKoitkaFriedrich2018,
  author    = {Trotzek, Marcel and Koitka, Sven and Friedrich, Christoph M.},
  title     = {Word embeddings and linguistic metadata at the CLEF 2018 Tasks for early detection of depression and anorexia},
  series = {Experimental IR meets multilinguality, multimodality, and interaction : 9th International Conference of the CLEF Association, CLEF 2018, Avignon, France, September 10-14, 2018, proceedings},
  publisher = {Springer International Publishing},
  address   = {Cham},
  year      = {2018},
  language  = {en}
}
@incollection{TrotzekKoitkaFriedrich2017,
  author    = {Trotzek, Marcel and Koitka, Sven and Friedrich, Christoph M.},
  title     = {Linguistic metadata augmented classifiers at the CLEF 2017 task for early detection of depression},
  series = {CLEF 2017 working notes : working notes of CLEF 2017 - Conference and Labs of the Evaluation Forum : Dublin, Ireland, September 11-14, 2017},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  year      = {2017},
  language  = {en}
}
@incollection{SorgallaWizentyRademacheretal.2018,
  author    = {Sorgalla, Jonas and Wizenty, Philip and Rademacher, Florian and Sachweh, Sabine and Z{\"u}ndorf, Albert},
  title     = {AjiL: enabling model-driven microservice development},
  series = {ECSA '18 : Proceedings of the 12th European Conference on Software Architecture: Companion Proceedings},
  publisher = {ACM New York},
  address   = {New York},
  year      = {2018},
  language  = {en}
}
@incollection{SpicherLovelaceKukuk2018,
  author    = {Spicher, Nicolai and Lovelace, Tyler and Kukuk, Markus},
  title     = {Feasibility of photoplethysmography imaging of the sole of the foot},
  series = {2018 IEEE International Symposium on Medical Measurements and Applications : June 11-13, 2018 : Rome : 2018 symposium proceedings},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  year      = {2018},
  language  = {en}
}
@incollection{StampaM{\"u}llerHeßetal.2018,
  author    = {Stampa, Merlin and M{\"u}ller, Marcel and Heß, Daniel and R{\"o}hrig, Christof},
  title     = {Semi-automatic calibration of UWB range measurements for an autonomous mobile robot},
  series = {ISR 2018: 50th International Symposium on Robotics : 20-21 June 2018},
  publisher = {VDE},
  address   = {Frankfurt am Main},
  pages     = {300 -- 305},
  year      = {2018},
  language  = {en}
}
@incollection{SorgallaRademacherSachwehetal.2018,
  author    = {Sorgalla, Jonas and Rademacher, Florian and Sachweh, Sabine and Z{\"u}ndorf, Albert},
  title     = {On collaborative model-driven development of microservices},
  series = {Software Technologies : Applications and Foundations : STAF 2018 Collocated Workshops, Toulouse, France, June 25-29, 2018, Revised Selected Papers},
  publisher = {Springer International Publishing},
  address   = {Cham},
  pages     = {596 -- 603},
  year      = {2018},
  language  = {en}
}